Parts Needed to Install Brake Controller and 7-Way Trailer Connector on 2013 Ford E350 Passenger Van

Updated 01/16/2021 | Published 01/14/2021

Products Featured in This Question

Tekonsha Primus IQ Trailer Brake Controller - Up to 3 Axles - Proportional

(2159)

$90.04

Deka Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot

(323)

$3.60

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(606)

$71.90

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3400)

$103.72

Question:

I have a 2013 Ford E 350 passenger van. I want to install a 7 pin connector for lights and brakes. The van is not equipped with a towing package. What are my best options For equipping this van with everything I need for lights and brakes?

asked by: Doug C

Helpful Expert Reply:

To begin, you will need to install a working 4-pin connector to access the taillight circuits in the van. I'd recommend using # 118551. You will also need a brake controller installation kit # ETBC7, which would include all of the wire, 7-Way connector/adapter that plugs into the 4-pin connector, circuit breakers and wiring connectors to complete the brake controller installation. You'll also need some extra wire, part # 10-2-1 due to the length of your vehicle.

For a brake controller (if you don't already have one), I'd recommend the Tekonsha Primus, part # TK90160. The Primus is a budget priced proportional controller that works very well.

I've linked to an install video showing the Primus being installed on a 2013 Ford Van, a video showing the 4-pin trailer connector install, a video that explains all the features and functions of the brake controller, and the instructions for the install kit.

expert reply by: Mike L