Air Bags And Under Bed Goose Neck Hitch For A 1993 Ford F-250
Updated 01/04/2021 | Published 12/30/2020 >
Products Featured in This Question
Question:
I have a 93 f250 4x4. Looking to add both airbags and a removable gooseneck hitch like a BandW.
asked by: Mike
Helpful Expert Reply:
For your 1993 Ford F-250 4x4, if you have over load springs, the goose neck hitch I recommend is the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs Item # BWGNRK1110. If you vehicle does not have the overload springs you want to use B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs Item # BWGNRK1100. Both of these kits are under bed kits so when the ball is removed or turned over and stored inside the hitch you have total bed access.
For air bags I recommend Air Lift LoadLifter 5000 Ultimate Air Springs w/ Internal Bumpers Rear Axle Item # AL88215. These air spring have a 5000lb load leveling capacity. A minimum psi rating of 5 and a maximum of 100 per bag. Keep in mind this does not increase the weigh carry capacity of the vehicle. The air pressure in each of the bags can be increased and decreased independently for any off center loads in the bed of the truck. Each spring has an internal jounce bumper that replaces your factory jounce bumper. These are designed for 1/2 , 3/4, and 1 ton trucks and come with all the necessary hardware to get them installed.
I do recommend installing the air bags before installing the under gooseneck hitch as it may be easier with installing any hardware on the frame rails.
To make it easier to add and reduce air pressure in the bags I also recommend Air Lift WirelessAIR Compressor System for Air Helper Springs - Remote - Bluetooth - EZ Mount Item # AL74000EZ. This compressor comes with a wireless controller however; you can also use your cell phone as the controller to add and decrease pressure from inside or outside the vehicle.
Product Page this Question was Asked From
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Gooseneck Hitch
- Below the Bed
- Flip-Over Ball
- 7500 lbs TW
- 30000 lbs GTW
- Wheel Well Release
- Spring-Loaded Loop
- B and W
more information >
Featured Help Information
Instructions
Miscellaneous Media




Continue Researching
- Q&A: Compatibility of Air Lift Air Bags and Curt Gooseneck Hitch on a 2016 Ford F250
- Q&A: How To Find Out If You Have Overload Springs for B&W Gooseneck Hitch on 1986 Ford F-250/F-350
- Q&A: Are There Air Bags for a 1997 Ford F-350 with In-Bed Hitch
- Q&A: Will Air Lift Air Bags Fit on a 1994 Ford F-250/F-350 with a 5th Wheel Trailer Hitch Installed
- Q&A: How Much Clearance Is Lost When Switching To A Gen-Y Gooseneck Pin Box
- Q&A: Gooseneck Hitch and Suspension Enhancement that Fit Together on 1996 Ford F-250
- Q&A: How to Tell if 1997 Ford F350 Has Overload Springs
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: How to Mount a Truck Bed Camper
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Performance Chips and Modules
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)

