bing tracking image
Q & A Icon

Compatibility of Air Lift Air Bags and Curt Gooseneck Hitch on a 2016 Ford F250  

Updated 04/30/2025 | Published 04/20/2021

Question:

Can the Load Lifter 5000 Ultimate p/n 88396 be installed with the CURT Gooseneck Kit p/n C60720 on a 2016 F250 4x4 short bed?

0

Expert Reply:

Yes, the Air Lift LoadLifter 5000 Ultimate Air Springs # AL88396 will work with the Curt Double Lock, Flip and Store Underbed Gooseneck Hitch # C60720. There is a section on page 9 of the installation instructions(linked below) for installing the air bags with an in bed hitch.

I recommend installing the Air Lift WirelessAIR Compressor System # AL74000EZ when you do install the airbags. This will allow you to control and monitor the pressure in the airbags from a wireless remote or through your smartphone. You can store 2 presets with the controller and the compressor will automatically restore the airbags to the correct pressure if it sees them vary by more than 3psi.

expert reply by:
0
Bud M
Patrick profile picture

Patrick

4/10/2025

I have a 1993 Ford F250 4 x 4 with the 7.5 engine. I also have installed a Curt 60723 gooseneck under the bed hitch. Will this ultimate 5000 work or do you have something that will if not?

JerredH profile picture
Etrailer Expert

Jerred H.

4/10/2025

@Patrick We have one set of Air Lift air bags that will work with your 4WD 1993 Ford F-250 that is compatible with an in bed hitch. It is the Air Lift LoadLifter 5000 Air Helper Springs item # AL88396. These have an identical 5,000 lbs capacity to the ones you were looking at.
Patrick profile picture

Patrick

4/10/2025

@JerredH so the brackets that hold, the airbags will not interfere with the brackets that hold the 5th wheel hitch
JerredH profile picture
Etrailer Expert

Jerred H.

4/10/2025

@Patrick That is correct.
See All (9) Replies to Patrick ∨

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>