Will Yakima Y8890279 Replacement Add-On Spine Work With Wheel Trays from Older HoldUp 2 Bike Rack

Question

Question:

Will this fit to Yakima Hold up EVO to make 4 bike rack? The additional 2 bike trays are from Hold up 2 which will be mounted to this spine.

asked by: Allan

1

Helpful Expert Reply:

That's a great question. I checked with Yakima and was told that the # Y8890279 replacement spine could be used with the trays scavenged from your older HoldUp 2 bike rack to construct a 2 bike add-on for your
# Y02479 HoldUp EVO bike rack. The bolt holes will line up perfectly.

expert reply by: Mike L

1

Answer 1

Yes, you can use Replacement Mounting Hardware part #Y8880128 to secure your Hold Up Plus 2 extension #Y02446 to your existing HoldUp platform carrier.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 5

Hello Theresa, Yes, the TorkLift GlowStep Revolution #TLA8002 will work on your 2022 Forest River Aurora 18BHS based on the measurements you provided. Your 24 inch ground clearance is right within the operating range for the 2-step #TLA8002, and the…

view full answer...

Answer 6

Hi John; the step on the Benton LittleShift Bike Rack #B54VR does not have a specific weight rating. It is capable of holding the max tongue weight capacity of your hitch so most adults will be able to use it for sitting/standing. We also have the…

view full answer...

Answer 7

The model number for a Yakima HoldUp bike rack like item #Y02443 will be on the rear side of the front cradle facing away from the vehicle as shown in the picture below. If you have a black Yakima HoldUp bike rack or the 2-bike add on item #Y02446…

view full answer...

Answer 8

The hardware to install the Replacement Spine #Y8890279 onto the Yakima HoldUp #Y02443 is the #Y8880128 you referenced.

view full answer...

Answer 9

I have a solution for adding turn signals to your Yakima Holdup part #Y02443 but it will require you to drill the cross tube of the rack which Yakima is not going to care for. What you need is the light kit part #98174LED which will plug into a 4-way…

view full answer...

Answer 10

To get straight to the point, the Thule T2 actually comes in a 2" version for your vehicle: Thule T2 Pro XTR Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount #TH83JV. So you would not need to use an adapter. To answer your other questions,…

view full answer...

Answer 11

I'm sorry to hear that you were hit by a car (hopefully you're ok!) and we do have exactly what you need, though the arm by itself is not something that is available from Yakima as a replacement part. For your Yakima HoldUp 2-Bike Rack…

view full answer...

Will Yakima Y8890279 Replacement Add-On Spine Work With Wheel Trays from Older HoldUp 2 Bike Rack

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching