Replacement Trailer Bearing for L44640

Question

Question:

Hello Looking for bearing L44640

asked by: Anti N

0

Expert Reply:

I may have a solution for you, but I'm not aware of a bearing that has the L44640 number. However, the Replacement Trailer Hub Bearing - L44649 # L44649 is a fairly common bearing found in trailer hubs and has an inner diameter of 1.063". If you can measure the inner diameter of your bearing and it has the same measurement, then the # L44649 would work for you. You'll want to measure with a digital calipers like the 4" Carbon Fiber Digital Caliper # PTW80157 to get the most accurate measurement.

If the bearing you have has a different inner diameter, just let me know what you find and I can see if it matches any of our other bearings.

expert reply by: Erik B

0

Answer 1

Red grease is considered to be the most heavy duty and waterproof grease out there so we recommend it highly for boat trailers. My honest recommendation would be to continue using the red grease like with part #L11390 but if you wanted to remove all…

view full answer...

Answer 2

From the numbers you provided it sounds like you need replacement grease seals. In my research, the grease seals I found with the GS-1719DL number have a 1.72 inside diameter and 2.565 outside diameter. The replacement double lip grease seals you…

view full answer...

Answer 3

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Answer 4

Hey Matt, thanks for reaching out. You are definitely on the right track here. The Bearing Kit #BK2-100 is exactly what you need for your Dexter 3,500 lb axles. Then for the U-bolts, the CE Smith U-Bolt Kit #CE23002. The Dexter Heavy-Duty Suspension…

view full answer...

Answer 5

Hey Tony, I would want all free-backing plates on a boat trailer if it was me as it allows you to back up the trailer easier. Basically they prevent the brakes from applying if you were ever to need to back up on a flat surface or a up a hill.…

view full answer...

Answer 6

Hello Dennis, You can use your current Chinese races, and just get the bearings from the Timken Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, GS-2125DL Seal #TMK32VR. You will want: - Inner bearing: Timken Replacement Trailer Wheel Bearing -…

view full answer...

Answer 7

Hey Kevin! Yes, we do have a double-lip grease seal in the size you need. Here is what I recommend: - Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1 #34823

view full answer...

Answer 8

The BTR and BT8 denotations refer to the spindle, not the trailer hub. The difference between a BTR and BT8 spindle is that the BTR spindle uses a 1.063" diameter L44649 bearing and the BT8 spindle uses a 0.99" diameter L44643 bearing. In…

view full answer...

Replacement Trailer Bearing for L44640

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching