Can I Put Two Bike Racks in a Dual Hitch Receiver?

Question

Question:

I am flat towing behind my RV and would like to know if # RM-077-4 will work for the # NV22G-NA22G on the top and my BlueOx below. I'm concerned that the overall length of the # NV22G-NA22G will interfere with the vehicle in tow

asked by: Lucas F

0

Expert Reply:

Do you mean, can the Swagman Original # S64152-2 3-Bike Hanging Rack be hitched in simultaneously with your Kuat NV 2.0 4-Bike Platform Rack # NV22G-NA22G if you use the Roadmaster Dual Hitch Receiver Adapter # RM-077-4?

Dual hitch receivers, like # RM-077-4, are designed for flat towing a vehicle behind an RV using the bottom receiver and have a top receiver is designed for accessories like bike racks or cargo carriers. It is not designed for two bike racks. Anyways, the bikes would not fit if, hypothetically, the two racks were loaded together.

If you need the ability to carry three more bikes along with your 4-bike Kuat NV, I recommend looking into our roof mounted bike rack category. I attached the category listing below. We also have fun other options depending on your vehicle, like truck bed racks or sport trailers.

expert reply by: Evangeline M

0

Lucas F.

9/17/2020

I am flat towing behind my RV and would like to know if # RM-077-4 will work for the # NV22G-NA22G on the top and my BlueOx below. I'm concerned that the overall length of the # NV22G-NA22G will interfere with the vehicle in tow

Evangeline M.

9/17/2020

The key thing to measure here is the arm length or distance from the hitch pin hole to the center of the base pin hole of your tow bar. If you are using a tow bar like Blue Ox Avail Tow Bar # BX7420, the arm length is 52" when extended and 42-1/2" when retracted. Now let's compare it to the length of the # NV22G-NA22G. When it's extended to 4 bikes and folded down and loaded, it has the length of 57-1/2" from hitch pin hole to the end of the rack. Unfortunately, that is not a fit if you were to hitch it together with your tow bar using the Roadmaster Dual Hitch Receiver Adapter # RM-077-4. Please note that that the Kuat NV is not rated to be used on the back of an RV mainly due to the extra road stress and shake that occurs in that position. If you remove the 2-bike extension, you can bring it down to 32" inches folded down, and in that configuration it would technically fit. The Swagman Original # S64152-2 3-Bike Hanging Rack you were looking at before has a length of about 33" when it's folded out, so it is a fit as well.

Answer 1

It sounds like you are wanting to carry a motorcycle on the back of your 2012 Toyota RAV4 while also towing a trailer. If that is the case then this is a pretty tall order for your RAV4 but is possible so long as the tongue weight of the trailer,…

view full answer...

Answer 2

Any type of hitch adapter or extender will have the unavoidable side-effect of causing a loss of about half of your hitch's rated capacity, both its tongue weight (TW) and it's gross towing weight (GTW). Hidden Hitch extender #HE18 and Curt…

view full answer...

Answer 3

One thing to note when using a hitch extender like the etrailer, #e88YR, is that the tongue weight and towing capacity of your trailer hitch will be reduced by 50 percent due to the increased leverage that is placed on your trailer hitch from your…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Kelly you're spot on, thanks for reaching out! Since you mentioned you have “the bar that the Falcon 2 hooks to” that tells me your current setup on the Geo Metro is using a Roadmaster crossbar-style base plate. I checked fitment for both…

view full answer...

Answer 7

Hey Dave, welcome back! The only front hitch that fits the diesel models is the EcoHitch Hidden Front Mount Trailer Hitch #EH37FR. Installation will require some trimming. You can see what it's like in the installation video linked further down…

view full answer...

Answer 8

Hey Chris, Our Fitguide can be a bit confusing sometimes. Essentially the whole category is broken down into whether they fit diesel or non-diesel models. Since the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH37FR fits both gas and diesel…

view full answer...

Answer 9

Hey, Michael! Thanks for reaching out. Yes, we do carry a front mount hitch for your 2025 Ram 2500 diesel. The EcoHitch Hidden Front Mount #EH37FR will fit both diesel and non-diesel models, but it will not fit the Power Wagon models. There’s no…

view full answer...

Answer 10

Hey John, thanks for reaching out. We do have a front hitch for the 2022 Ram 2500 Power Wagon, but the EcoHitch #EH37FR you mentioned will not fit the power wagon models. What you will need instead is the following: - Curt Front Mount Trailer Hitch…

view full answer...

Answer 11

Hey Donnie, I have great news we do have a front hitch that fits your 2004 Fleetwood Tioga with the Curt front hitch part #33055. This would work great for carrying a bike rack. What kind of bike racks do you have and do you have a bike rack…

view full answer...

Answer 12

Hi Robert! The EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" #EH37FR will indeed fit your 2026 Ram 3500 diesel Mega Cab Laramie edition. I confirmed this with EcoHitch and we actually have a review from another person that…

view full answer...

Can I Put Two Bike Racks in a Dual Hitch Receiver?

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching