How to Determine Landing Gear for 2010 Keystone Raptor Trailer

Updated 09/21/2020 | Published 09/17/2020

Products Featured in This Question

Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs

(216)

$919.84

Lippert Electric Landing Gear Set - 37" Lift - 6,000 lbs

(70)

$805.84

Question:

I have a 2010 Keystone Raptor RP3812S10 that i need the front landing gears with motor?

asked by: John A

Expert Reply:

To determine the correct replacement landing gear, you will need to measure the mounting brackets on your trailer from the underside of the top bracket to the top of the lower bracket as shown in the diagram. From there you will be able to choose the amount of lift and weight capacity that will work for you.

Your brackets are likely to have 17-1/2" from outside to outside of the brackets, and if so, the Stromberg Carlson Electric Landing Gear Set # LG-3 has has 34-7/8" of lift and a 6,500 lb capacity.

For 37" of lift you can use the Lippert Electric Landing Gear Set # LC333964.

I've added a link to our page with our selection of landing gear for you to take a look at.

expert reply by: Kyle S