Curt 3-Piece Hitch Does Not Fit a 2006 Chevrolet Silverado 3500

Updated 09/16/2020 | Published 09/15/2020

Products Featured in This Question

Curt 3-Piece Trailer Hitch Receiver - Multi Fit - Class V - 2"

(69)

$315.99

B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2"

(9)

$329.00

Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"

(33)

$400.94

Question:

i recently ordered hitch from etrailer for 2006 chevy silverado 3500. Was labeled as would for truck but it seems to be a few inches to narrow. It seems like my frame is about 36inch in between and i got the wrong hitch?

asked by: ROBERT D

Expert Reply:

The Curt 3-Piece Hitch, part # C15511, is a confirmed fit for only one style of the 2006 Chevrolet Silverado 3500: the Cab and Chassis style.

There are two additional styles of the 3500: the Standard Pickup and the Pickup with a 10 Inch Deepdrop Bumper.

Unfortunately, if you have either of the Pickups, this hitch will not fit. Whichever you have, you can return the 3-Piece and get the correct hitch for your Silverado.

If you have the Standard Pickup, I recommend getting the Curt Class V, part # C15313. It's comparable to the 3-Piece but has a slightly higher gross trailer weight and tongue weight.

If you have the Pickup with a 10" Deepdrop Bumper, I recommend the B&W Heavy-Duty Trailer Hitch Receiver, part # BWHDRH25187. It's also comparable to the 3-Piece with a slightly higher gross trailer weight and tongue weight.

If you do in fact have the Cab and Chassis 3500, the reason the 3-Piece doesn't fit could be because of flexing. This can happen during shipping due to the material the hitch is made from. To remedy this, you can flex the brackets back by using a vice, a jack, or even just using a set of stairs. I've linked to an article that can help you with this.