Is There a Draw Tite Hitch that Fits 2020 Kia Soul

Question

Question:

If you ever get to try this on a 2020 Kia Soul, Id like to know. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - 2" Item # DT25GR

asked by: Ray L

0

Expert Reply:

The Draw Tite hitch for your 2020 Kia Soul that is a Class I with part number # DT25GR, is a confirmed fit, so this would be your best solution. We have not yet had the chance to install it on the Soul. I did attach the installation instructions for you.

expert reply by: Jameson C

0

Answer 1

You are correct that both the Curt #C89KR and Tekonsha #118813 are going to fit your 2024 Kia Soul without LED lights. Both products are going to be virtually identical. You are looking at two different manufacturers version of the same custom fit…

view full answer...

Answer 2

The Curt #C67FR does have better ground clearance than the Draw-Tite #DT25GR for your 2020 Kia Soul. The reason you have to make a cutout for the Draw-Tite and not the Curt is because Draw-Tite decided to add a plate between the crossbeam and the…

view full answer...

Answer 3

Yes, the Curt 4-way trailer wiring harness part #C89KR that you referenced does fit your 2023 Kia Seltos. We have confirmed this with Tekonsha.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

Hi Stephanie! Great question and you’re totally right to ask, because most hitches for the 2024 RAV4 do require a bit of bumper trimming. That includes the Oris Detachable Hitch #TS66VR, since it uses a hidden design that needs a hole cut in the…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Is There a Draw Tite Hitch that Fits 2020 Kia Soul

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching