Replacement Trailer Bearing Kit for Dexter P-11 Model SLR Axle on 2000 Jayco Quest 8U
Updated 09/07/2020 | Published 09/03/2020
Products Featured in This Question
Question:
I have a 2000 Jayco Qwest 8U pop-up trailer and havent had any luck finding the part numbers for the hubs, bearings and seals. I havent pulled a hub apart yet, but I know I will need part since the trailer has sat two years and have no clue the last time the bearings were serviced.Replacement bearing kit for Dexter P-11 Model SLR axle?
asked by: Stephen Y
Expert Reply:
Unfortunately there isn't a database of that information. The P-11 SRL only clarifies the plant the axle was made in. Based on the model, it looks like a smaller capacity axle, but to confirm fit, you will need to pull a hub. Then you have two options to get the replacement bearings:
-You can look at the numbers printed on the grease seal, and the face of the inner and outer bearing which does require disassembling the hub.
-You can leave the hub intact and measure the spindle at the bearing and seal locations using a digital caliper like # PTW80157. The measurements need to be precise, but measuring the spindle will allow you to keep the hub and bearings intact. I've attached a photo to assist.
Product Page this Question was Asked From
Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649
- Race L44610
- 1000 lbs Axle
- 2000 lbs Axle
- 2200 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Shop: Replacement Brake Spring Set for Dexter 10" x 1-1/2" Electric Trailer Brake Assembly
- Search Results: 23~106~09
- Article: Guide to Choosing the Best Truck for 5th-Wheel Towing
- Shop: Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Left Hand - 6,000 lbs
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand - 6K AL-KO/Hayes Axles
- Search Results: dexter 8~248
- Q&A: Recommended Brake Assemblies and Drums for Dexter P-11 model SLR SND 490400 Axle
- Q&A: Identifying Dexter Axle Marked P-11 With 70 Inch Spring Center Measurement
- Search Results: electric drum brakes trailer brakes
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 10K
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Q&A: Hub Recommendation to Replace Dexter Hub Marked 8-248
- Search Results: rear seal
- Search Results: brake spring kit
- Search Results: spring kit
- Search Results: k23~472~00
- Q&A: How to Match Replacement Hub to Ensure Compatibility
- Q&A: Brake Assembly and Hub Assembly for a 5,200 lbs P-11 Dexter Axle With Serial # D4526043
- Q&A: Difference Between Trailer Tires ST205/75D14 and ST205/75R14