Swagman XTC-2 Bike Rack Compatibility With The EcoHitch Invsi Receiver On 2016 Subaru Crosstrek

Question

Question:

Hi, I recently had this installed on my 2016 subaru crosstrek 306-X7203and know that I need to make sure the stinger doesnt exceed 2 3/8inch from the center of the pin hole but cant find that information on the product page. Will this bike rack work?

asked by: Nicole H

0

Expert Reply:

The Swagman XTC-2 TILT 2-Bike Platform Rack - 1-1/4" and 2" Hitches - Tilting # S64671 will work well for the EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2" # 306-X7203. The hitch pin will be about 2 inches on center from the end of the shank.

expert reply by: Jason S

0

Answer 1

Yes the Swagman XTC-2 TILT #S64671 that you referenced can transport bikes with slanted top tubes like you mentioned which are common on womens style bike frames. The hook will slide down pretty far on the mast and secure to the bike frame. I…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hi Cameron! For your 2025 Mazda 3 Sedan, I prefer the Curt #C44DR over the Draw-Tite #24982. They are almost identical and have the same weight capacities, but Curt is made in America and Draw-Tite is not. This pretty much always pushed me to the…

view full answer...

Answer 4

To lock the Swagman XTC2 TILT Bike Rack #S64671 to your etrailer Trailer Hitch Receiver #e98843 you need the Locking Anti-Rattle, Threaded Hitch Pin #S64029 you referenced, but I actually recommend picking up the Anti-Rattle Hitch Lock and Cable…

view full answer...

Answer 5

Thank you for your question, Thomas. The answer to your first question is yes, you absolutely can use the Kuat Transfer V2 #KU64FR without using the adapter sleeve. However, because of how the wheel hook will need to hold onto your bike, your fenders…

view full answer...

Answer 6

Your bike that has a thicker tube will fit on the Swagman XTC-2 TILT 2-Bike Rack #S64671. The frame hooks of the XTC-2 will easily accommodate that size of tube, and will retract down far enough in order to grasp the frame. You will need to place…

view full answer...

Answer 7

Yes, the Swagman XTC2 TILT Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount #S64671 is a great economical rack to use on your 2021 Lexus RX 350 with a 2-inch hitch receiver. As far as installing and removing your hitch to your…

view full answer...

Answer 8

The Hollywood Racks Trail Rider 2-Bike Rack #HR200 weighs about 35 lbs. The Swagman XC 2-Bike Rack #S64650 is lighter at about 26 lbs. The biggest difference between the two is the Swagman rack is rated for 2 bikes at 35 lbs each and the Hollywood…

view full answer...

Answer 9

I checked with all of our vendors and the only hitch option currently available for the 2024 Hyundai Sonata Hybrid is the Curt item #C23RV. This is a class I hitch with a 1-1/4" receiver. It has a 2,000 lbs towing capacity and a 200 lbs tongue…

view full answer...

Swagman XTC-2 Bike Rack Compatibility With The EcoHitch Invsi Receiver On 2016 Subaru Crosstrek

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching