Lug Nut Size for 2019 Rockwood Mini Lite 2104S Travel Trailer

Question

Question:

I have a 2019 Rockwood Mini Lite. 2104s with a stripped lugnut. Cap was stripped. 3/4 inch lug wrench fits it. 14 inch wheel. What size lugnut will fit? Total length about 1 1/4 inches without cap. Can’t seem to find the right size at the local auto stores. Thanks

asked by: Jay W

0

Expert Reply:

Your 2019 Rockwood Mini Lite 2104S travel trailer uses a hub with 1/2 inch studs such as the Dexter Trailer Hub and Drum Assembly # 84546UC3.

So you simply need lug nuts that fit those 1/2 inch studs, the Lionshead Trailer Wheel Lug Nut - 1/2"-20 # LHLR103.

expert reply by: Kyle S

0

click to enlarge

Answer 1

At 2.09375 inches long trailer hub wheel stud #7-150 is a little shorter than the 2-1/4 inch ones that you have but it is the same Dexter part just with a different number. It would appear that Dexter measured overall length whereas the 2-3/32 inch…

view full answer...

Answer 2

I contacted our representative at Axle Tek and he informed me that the studs on the Trailer Hub Assembly, part #AKIHUB-440-2-1K are Drive In Studs, so they are either pressed or hammered in. This hub assembly will work with your 2000 lb Axles, 4 on 4…

view full answer...

Answer 3

For you I highly recommend the DeeMaxx Trailer Wheel Lug Nut #DE93GR. These use the same 1/2" - 20 with a 60 degree cone. They are solid one-piece design, which will more durable and rust resistant than the two-piece options.

view full answer...

Answer 4

On Dexter 12" Nev-R-Adjust Electric Brake Assembly #23-458 the shoe pad thickness is 3/16 of an inch. Dexter says that you should replace the shoes if the material gets down to 1/16 of an inch thick or less.

view full answer...

Answer 5

Trailer wheel lug nuts that are 1/2-inch inside diameter typically have a 20-TPI thread pitch (20 threads per inch). Most lug nuts also use a 60-degree-coned profile like #CE11051, but a 90-degree like #STN569 is also available for 9/16-inch studs.…

view full answer...

Answer 6

Since most trailer manufacturers do not make wheel and tire information available to the general public, it is hard for me to tell you what size lug nuts you have on the wheel. I can tell you they do have caps over them. The most common size of lug…

view full answer...

Answer 7

We do have what you need to replace the UFP HD-1377-10 hub and drum as well as add hydraulic brakes for your boat trailer. Here are the exact parts you will need: - Dexter Trailer Hub and Drum Assembly #84546UC3 - Hydraulic Trailer Brake Kit -…

view full answer...

Answer 8

Hi Christopher! While we do not have full kits for brakes and drums, we can definitely put one together! Do you happen to know the bearing numbers for the axle? Easiest way to know would be to find the axle tag/sticker and see what Sloan says, but we…

view full answer...

Answer 9

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

Hi Rusty; the Dexter #84546UC3-EZ and etrailer #AKHD-5475-35-K will both fit a 3,500 lb axle but they have different bolt patterns. You already ordered the Dexter in the past so I'm assuming your wheels are 5 on 4-1/2. For the same bolt pattern…

view full answer...

Answer 12

Hi Ben; the difference in the drum size won't make a difference as long as you have a #84 spindle with #L68149 inner and #L44649 outer bearings. The #AKHD-545-35-EZ-K is 10" x 2-1/2" while the #84546UC3-EZ is 10" x 2-1/4" and…

view full answer...

Lug Nut Size for 2019 Rockwood Mini Lite 2104S Travel Trailer

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching