Is Buyers Products 2-1/2" Wide Fender Extension Available in 25' Coil

Question

Question:

This looks like what I need,but I only need 25foot for 4 fenders on my 1986 Dodge that already has the holes drilledtruck just got painted and Im looking for new flaresPlease correspond,thanks..

asked by: Brian G

0

Expert Reply:

The Buyers Products 2-1/2" Wide Fender Extension # 337B52150 is only available in a 50' coil so you can either use the other 25' for replacement parts or try to sell it to someone else. I checked with Buyers Products and verified this.

expert reply by: Jon G

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 5

To measure the pilot hole on your wheel, you will need to remove the cap in the picture and then measure the inside diameter of the hole in the wheel. Most wheels with the bolt pattern you have in the photo are 4.88 inches or 4.9 inches with a select…

view full answer...

Answer 6

We only carry the 1 inch long rivets for installing shower surrounds with the part #LC210278 which is the standard size for this application. We do not have a shorter version since this is the standard size.

view full answer...

Answer 7

There isn't a specific amount of ground clearance required when installing a jack such as Square Direct Weld Jack #TJD-12000SP-R2NH. You would mount it however it is needed for your trailer. The overall height of the jack when fully retracted is…

view full answer...

Answer 8

I do have an option for you but I don't have any way to reduce the ground clearance of your existing a-frame jack . That said, what you can do to fix this issue is replace your existing jack with the Ultimate Trailer Jack part #322-RDJ-2K. The…

view full answer...

Answer 9

Yes, the Torflex Lift Kit #K71-724-02 is compatible with your #11 Torflex axle. The note about the 3" high profile bracket is corresponding to the brackets on the axle and not the Trailer Hanger #DX57FR. Your brackets appear to be 3-3/4"…

view full answer...

Answer 10

The Rubber Window Edge Weather Strip for RVs #SR66ZR is the only 1/2" tall x 1/4" wide weather stripping we currently have. Unfortunately we do not have any sort if database that tells us the weather stripping your 2004 Featherlite Model…

view full answer...

Answer 11

To test the weight of your ramp door, you will want to get the door all the way down to the ground and then on a scale of some kind (a bathroom scale can be used for this if it's the only thing available). This will be when the door is at its…

view full answer...

Is Buyers Products 2-1/2" Wide Fender Extension Available in 25' Coil

Product Page this Question was Asked From

Continue Researching