Troubleshooting Solera Awning Motor Retracting Slowly or Stopping

Updated 07/27/2020 | Published 07/23/2020

Products Featured in This Question

Replacement Motor for Solera Power RV Awnings Manufactured before 2015

(66)

$206.91

Replacement Switch Kit for Solera Power RV Awnings - White

(4)

$31.12

Replacement Switch Kit for Solera Power RV Awnings - Black

(19)

$31.45

Question:

My Solera awning extends fine, but bogs down and stops when retracting. Wiring and voltage are good, Reviews of replacement motors from etrailer document similar problems with extension/retraction. Is there some other possible source of retraction resistance/drag that I could check? I dont want to replace this motor and have the same problem.

asked by: Jay O

Helpful Expert Reply:

I checked with the manufacturer for you, and they say that the Solera Awnings are slower when they retract. If you are sure there are 12 volts by testing with a multimeter the next thing to do is ensure the pitch arms aren't bent at all, which can cause issues.

After that, they said to take a look at the ground wire before the switch, and make sure that has a good connection. Also make sure the switch is not damaged in any way, and if it needs replacing you can do that with the Solera Power Awning Switch Kit # LC285499 (White) or # LC285500 (Black).

Outside of that, the motor may just be bad and needs a replacement with the Solera Power Awning Replacement Motor # LC266149.

expert reply by: Kyle S