Recommended Trailer Hitch for 2015 Mercedes-Benz Sprinter Passenger Model with Standard Bumper

Question

Question:

Do you have a hitch to fit a 2015 passenger van? The details on the description say that it does not work for a passenger. Can you provide a part number and does the spare tire need to be removed permanently?

asked by: Mark C

0

Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75549 is a fit for a 2015 Mercedes-Benz Sprinter Passenger Model with Standard Bumper but you do need to be sure you don't have the 30-3/8" frame, measured outside to outside of frame.

I have attached a review below which confirms fit from one of our customers on the passenger model. I don't show the spare tire needs to be removed.

expert reply by: Conner L

0

click to enlarge

Answer 1

Both the Curt hitch #13358 and Draw-Tite hitch #75601 will fit your 2016 Mercedes Sprinter 2500 if you have the 170 inch wheel base and factory step bumper. Its almost a dead heat between the two, but I'm giving the edge to #13358. The #13358 has…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 9

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 10

Hi John! We definitely have hitches available for your 2026 Lexus RX350h and the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e29ZV is a great option. The matte finish makes our hitches blend in better than…

view full answer...

Answer 11

Good morning to you as well Steve, and congrats on your new van! I would be more than happy to make a recommendation for you! The best hitch for your 2026 Toyota Sienna, is going to be our etrailer item #e56RR. This is a class III hitch with a…

view full answer...

Recommended Trailer Hitch for 2015 Mercedes-Benz Sprinter Passenger Model with Standard Bumper

Continue Researching