Recommended Replacement Mounting Hardware for Thule Cascade XT Cargo Box

Question

Question:

Hi, Im looking for a replacement U bolt for Thule Cascade XT box. Any ideas?

asked by: Mark D

0

Expert Reply:

To replace the mounting hardware on your Thule Cascade cargo box, you will need the Thule quick mount hardware # TH04997. This won't be the original U-bolts, but it will work in the same way. I've attached a photo that shows how it works.

expert reply by: Erik B

0

click to enlarge

Answer 1

I checked with Thule and the u-bolts specific to the Quick Snap mounting hardware is #43216 . The U-bolt spacers #TH10785 are still available as well but the rest of the assembly has been discontinued.

view full answer...

Answer 2

We have previously confirmed with Thule (the manufacturer of this cargo box) that the correct replacement mounting hardware for your Sears X-Cargo 28-7271 is the Replacement Hardware Kit #SR05587 which does include the U-bolts required for this cargo…

view full answer...

Answer 3

According to my Thule representative, the actual mounting hardware originally used on the Cascade 1700 is no longer available. The good news is that a mounting kit for newer boxes, the EasySnap U-Bolt #43216 is available and will work with your…

view full answer...

Answer 4

If you need replacement mounting hardware for your Thule Cascade Rooftop Cargo Box then we can help with this using the parts listed below. Unfortunately, we don't have any way to convert this mounting system over to a newer and easier to use…

view full answer...

Answer 5

My contact at Thule said that there are no replacement lock assemblies for their cargo boxes; only the lock cores. He did say that you can either get a key extraction tool from your local hardware store and attempt to get the key out yourself.…

view full answer...

Answer 6

The Replacement EasySnap Mounting Hardware for Thule Time Travel ES Series Cargo Boxes #05704 will only fit your Cascade XT cargo box if it already has the quick-snap style mounting hardware. If not, then you'll need the Replacement QM3 - Quick…

view full answer...

Answer 7

When the original mounting hardware for a rooftop cargo box like the Thule Cascade XT will not fit on a vehicle's OEM roof rack crossbars you can substitute alternate hardware. The original u-bolts used for this cargo box are no longer available…

view full answer...

Answer 8

The original mounting hardware for the Thule Cascade XT is no longer available. A good alternative is the Thule Replacement Quick Mount Hardware #TH04997. This fits crossbars up to 1-9/16 tall x 3-3/4-inches wide. If you end up needing to drill new…

view full answer...

Answer 9

I went out to the warehouse and pulled replacement u-bolt #853-3105 to take some measurements. The width between the two ends is approximately 2-7/16 inches. The center to center distance though is 2-11/16 inches. The internal length is 3-1/2 inches…

view full answer...

Answer 10

Hi Aaron, I checked directly with Thule for you and found the U-bolt from the Replacement EasySnap Mounting Hardware for Thule Time Travel ES Series Cargo Boxes #05704 has actually been discontinued and not sold separately. I went through every other…

view full answer...

Answer 11

The red blinking light on the light of the Atwood RV Carbon Monoxide and Propane Gas Detector AT36681 typically means that the propane sensor is disabled or faulty. Since you've already tried resetting the unit you'll want to make sure you…

view full answer...

Answer 12

The WingBar Edge roof rack will add about 4-1/4" to the height of your 2023 Chevy Tahoe (4" for the crossbars but about another 1/4" for the caps on the legs), and that measurement is taken from the roof to the top of the crossbar. If…

view full answer...

Recommended Replacement Mounting Hardware for Thule Cascade XT Cargo Box

Featured Help Information

Miscellaneous Media

Continue Researching