Compatible Axle with Spring Center Measurement of 82 Inches

Updated 07/01/2020 | Published 06/29/2020

Products Featured in This Question

Dexter Trailer Axle w/ Idler Hubs - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs

(417)

$524.77

Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter

(649)

$15.43

Question:

I have a 2009 trailmaster 20’ pontoon boat trailer and need to replace the axle. I do have a 95” hub fave measurement but Rh spring center measurement is 82” not 80”. I just wanted to verify Dexter 7359765-I will work. This is a common trailer and would assume this is correct.

asked by: David C

Expert Reply:

The Dexter Trailer Axle w/ Idler Hubs - E-Z Lube - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs # 7359765-I can work for you if you weld on new spring seats # TRSS238 in the correct location for your application. You will need to remove the current mounts and add the new ones ensuring they are aligned. Then once welded make sure to use a primer and sealer and paint to protect from corrosion.

expert reply by: Jason S