Parts Needed To Install Reese Above Bed Base Rails On a 2015 Ford F-250

Question

Question:

I currently have the Reese kit RP50087-58 installed on my Ford F150. I am upgrading to an F250 and will be removing the bed rails from the F150. Will the Reese bed rails that came with RP50087-58 work with bracket kit RP56016? If not, is there another frame bracket kit that will work or will I have to buy an entire new bracket and bed rail kit?

asked by: Scott B

0

Expert Reply:

In order to install the Reese Universal Base Rails for 5th Wheel Trailer Hitches part # RP58058 on a 2015 Ford F-250 you can use the Reese Quick-Install Custom Bracket Kit for 5th Wheel Trailer Hitches part # RP50026.

expert reply by: Conner L

0

Answer 1

The Reese Outboard Rail Kit part #RP56016-53 that you referenced comes with all hardware needed. That means all of the hardware that installs the brackets to your truck and all of the hardware that installs the rails to the brackets. I attached an…

view full answer...

Answer 2

These brackets are very similar and have very close instructions when it comes to install as well. There is about a 5 inch difference in the location of where these brackets are installed and then when you get towards the end of the instructions…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Parts Needed To Install Reese Above Bed Base Rails On a 2015 Ford F-250

Continue Researching