Will Smart-Slot Crossbar Adapter Kit for Yakima BigCatch Saddles Fit Thule WingBar Evo Bars

Question

Question:

Hello, will the Smart-Slot Crossbar Adapter Kit for Yakima BigCatch Saddles fit in the Thule Evo WingBar?

asked by: Vincent

0

Expert Reply:

Yes! Using the Smart-Slot Crossbar Adapter Kit # Y04092 will allow you to mount the Yakima BigCatch Kayak Carrier w/ Tie-Downs # Y04091 to the Thule WingBar Evo crossbar channels.

expert reply by: Jon G

0

Answer 1

Yes the SmarT-Slot Mounting Kit for Yakima HighSpeed and HighRoad Roof Bike Racks #Y02122 that you referenced does fit into the top channels of the Thule WingBar Evo crossbars.

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 6

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 7

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 8

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Answer 9

Hey Jarrod, the 420 model isn't available just yet. We haven't received a estimated release date for that Dometic model. If you are interested in a comparable option or needing something sooner, the Dometic 410 #DMC44JF is what most of our…

view full answer...

Answer 10

The etrailer.com Electric Trailer Brake Kit #AKEBRK-7-SA and the Dexter Nev-R-Adjust Electric Brake Kit # 23-464-465 referenced in your question are both self-adjusting assemblies that will work to replace the existing Dexter brakes on your 7,000…

view full answer...

Will Smart-Slot Crossbar Adapter Kit for Yakima BigCatch Saddles Fit Thule WingBar Evo Bars

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching