Tekonsha Brake Controller Wiring Harness for 2020 Jeep Grand Cherokee

Question

Question:

I have a Prodigy P3 brake controller that I removed from my previous vehicle. I am looking to install it in a 2020 Jeep Grand Cherokee. Do you have a plug in harness for this vehicle or will I have to hard wire it in. I only need the wiring harness.

asked by: Tom R

0

Expert Reply:

Since you said you only need the wiring harness for the P3 I assume you also have a factory 7-way trailer connector on your 2020 Jeep Grand Cherokee. If that's the case then all you need is part # TK93VR.

expert reply by: Charles S

0

Answer 1

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 2

While we don't have a harness that plugs into the factory port of your 2020 Jeep Grand Cherokee that has a matching end for the factory brake controller we do have this type of solution for an aftermarket brake controller like the very popular P3…

view full answer...

Answer 3

Hi Doug; I'm sorry to say that there are no custom fit towing mirrors for your 2024 Ford Ranger. The only option is to use universal mirrors. I recommend the K-Source Universal Towing Mirrors #KS3891-2. I prefer these over others since they have…

view full answer...

Answer 4

The best fitting tow mirrors available for your 2023 Jeep Gladiator would be the K-Source mirrors part #KS39NQ which are custom fit for the factory mirrors of your vehicle. The CIPA mirrors you mentioned would work but they are universal fit so they…

view full answer...

Answer 5

You can absolutely move the Curt TriFlex Trailer Brake Controller #C24VV from your 2016 Jeep Cherokee Trailhawk to your new 2021 Jeep Grand Cherokee with the factory tow package, but you will need a different plug in adapter. As long as the…

view full answer...

Answer 6

In order to install the Curt Discovery Trailer Brake Controller part #C84VV on a 2020 Jeep Grand Cherokee you will need the Curt Custom Wiring Adapter for Trailer Brake Controllers part #C51446 which makes for a plug and play installation.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Tekonsha Brake Controller Wiring Harness for 2020 Jeep Grand Cherokee

Featured Help Information

Miscellaneous Media

Continue Researching