Does the Size of the Center Bore Matter When Selecting 5 Lug Spare Wheel/Tire for Trailer
Updated 06/09/2020 | Published 06/05/2020 >
Question:
Hi i have a trailer with rims that have 5 lug 4.5 space. I wanted a spare rim. Does center bore matter at all. I have seen alot with 3.19. but i think mine is like 2.75. Just using as spare so want to make sure before i buy. Thanks
asked by: Alex E
Expert Reply:
The center bore is more or less irreverent when using lug piloted wheels which are most common on trailers. The center bore simply needs to fit over the hub which is rarely an issue. I have attached a list of all our wheel/tires that use a 5 on 4-1/2" bolt pattern. I would be glad to make a recommendation if you can provide the tire size.
If you don't already have a spare tire carrier, take a look at the CE Smith Offset Spare Tire Carrier part # CE27310G.
Product Page this Question was Asked From
CE Smith Offset Spare Tire Mount - Galvanized Steel - 4- and 5-Lug Wheels
- Spare Tire Mount
- Frame Mount
- Bolt-On
- 4-Bolt
- 5-Bolt
- Trailer
- Marine Grade Finish
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: lm11949
- Search Results: bearing lm11949 trailer bearings races seals caps
- Search Results: lm11910
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Q&A: How To Determine the Weight Capacity For a Trailer Axle
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Timken Replacement Trailer Wheel Bearing - LM11949
- Video: Review of TruRyde Trailer Spindles - Standard Spindle - TRU94FR
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Q&A: How to Select Replacement Hub for Fleetwood Coleman Destiny Pop-Up Camper
- Q&A: Availability of Bushing to Convert 3/4" Spindle to 1" Spindle
- Q&A: How Full Should Boat Trailer Hubs be Filled with Grease
- Video: Complete Breakdown of the CE Smith Grease Seals
- Video: An In-Depth Look at the Replacement Race for LM11949 Bearing
- Video: Timken Replacement Trailer Wheel Bearing: The Breakdown
- Article: How to Raise Your Travel Trailer Height
- Q&A: Replacement Hub for a 3/4 Inch Diameter Straight Spindle
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Video: Torflex Lift Kit Feature Review
- Search Results: easy grease
- Search Results: ez lube grease cap trailer bearings races seals caps
- Search Results: ez lube trailer hubs and drums
- Search Results: ez lube
- Q&A: Comparing a 5.30x12 and 5.70x8 Trailer Tire
- Q&A: Recommended Tires For 1994 Coleman Destiny Cedar XL With 5.30x12 Tires
- Article: Slipper Spring Trailer Suspension System Review

