Video Transcript for Review of Kenda Trailer Tires and Wheels - Karrier KR35 ST175/80R13 Radial Nardo Gray Mod - KE84TJ

Hi everybody, Andy here with etrailer. Let's take a quick look at this Kenda Karrier KR35ST175/80R13 load range D radial trailer tire mounted on this 13 inch Nardo gray mod wheel. Now this is gonna be a really ready to go trailer tire and wheel combo. So that means that this tire is obviously already mounted to this wheel so no extra assembly is gonna be needed. This is built for convenience and reliability especially if you just want something that you can install and hit the road with. As I mentioned at the beginning of our time together and as we have stamped here on our tire this is an ST17580R13 radial trailer tire.

So this is really common size for smaller trailers. It's a load range D so it can handle up to 1,650 pounds at 70 PSI so this is gonna be a solid choice for typical hauling whether that's a utility trailer, small camper or boat trailer. So this is mounted on a 13 inch steel wheel with a five on four and a half inch bolt pattern which is one of the most common trailer bolt patterns out there. So chances are it's gonna fit your trailer as long as you have that same setup. If you need help measuring your bolt pattern on your trailer take a look at this product page a little bit lower and we walk you through how you can measure your bolt pattern to make sure that this is going to work for you.

This wheel uses half inch by 20 lug nuts and it has a 3.19 inch pilot diameter. This does not include a center cap but if you decide to pick one up you just wanna make sure it fits that 3.19 inch pilot diameter so it's gonna help ensure proper fitment to the hub. Performance wise the radial construction is a big plus for this trailer tire. That's gonna help the tire run cooler on the road and wear more evenly over time which usually means a longer lifespan. The tread is designed by Kenda it's a KR35 tread so it does a good job of channeling water away so you're gonna be able to get more confident traction in wet conditions.

Of course that's important if you're towing in the rain. The wheel itself is finished in a Nardo gray powder coat. I'm a big fan of this particular shade of gray. It looks modern and I think it's gonna match with a lot of trailer setups. So it's a powder coat and it's not just for looks it does go through a two-step finishing process with an E-coat primer.

That's gonna help resist rust and corrosion from road grime and weather. The wheel is rated slightly higher than the tire at 1,725 pounds. The wheel itself is more than capable of supporting the tire's full load. I think that's gonna wrap up our quick look today. If you have any questions don't hesitate to reach out. We do wanna make sure that you're getting exactly what you need. Well again, my name's Andy. Thank you for joining me.