Wiring Instructions for 12 Volt Lasalle Bristol RV Fan # 344410TSDC36BNOKCY

Question

Question:

I need a better wiring diagram then the one that came with fan, it makes no sense and has no examples

asked by: Nicholas R

0

Expert Reply:

The wiring diagram for the 12 volt Lasalle Bristol RV Fan # 344410TSDC36BNOKCY that you mentioned is a bit confusing but if you check out the picture I attached and follow the written instructions on where each wire goes that should be much more helpful and self explanatory.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The four wires in the picture of the 12V RV Ceiling Fan w/ Wall Switch #344410TSDC42BNBK you referenced are coming from the wall remote #344410TSSW12V. You'll wire the wall remote in the following manner: White: Fan Motor + Blue: Fan Motor -…

view full answer...

Answer 2

To wire a 4 speed fan like the East Seventeen 12V RV Ceiling Fan #344410TSDC36BNOKCY, you'll start by connecting the fan supply wire (black wire) and the light blue wire to household supply. Next, connect the white neutral wire to the white…

view full answer...

Answer 3

This is not really the recommended setup, but you could use a 110v fan like the 42" Hugger Style RV Ceiling Fan #277-000086 in your 12v DC setup if you have a power inverter on your 5th wheel that supplies both 110v and 12vDC power throughout…

view full answer...

Answer 4

That does sounds frustrating, Cody. But, I do think I've stumbled onto something you can use. According to the instructions, the wiring for the actual fan motor goes: -Connect the white (positive) wire from motor to the white (positive) wire from…

view full answer...

Answer 5

In regards to the 42" Ceiling Fan for RVs part #324-000056, there is a blue wire on the switch that gets ran to a blue wire on the motor of the fan as well as a white wire on the switch that gets ran to a white wire on the motor of the fan.…

view full answer...

Answer 6

We do have an option for replacing your Elixir ELX-60. Unfortunately there is not going to be a direct replacement for the converter section. You will need to replace the entire panel with the Progressive Dynamics 4500 Series RV Converter…

view full answer...

Answer 7

Hey Charles, welcome back! I completely agree with your reasoning and the Curt RVi Series Shadow 2 Flat Tow Brake System item #RVI94FR is the newest and most popular braking system on the market right now. It's compatible with every type of…

view full answer...

Answer 8

The East Seventeen Hugger Style RV Ceiling Fan - 12V - 42" - Brushed Nickel - White Blades part #344410TSDC42BNWH will have 4 wires between the fan and the switch to power the included switch features such as speed control/direction. The…

view full answer...

Answer 9

Hey Ron, thanks for reaching out. The Furrion FCD48TASF camera is the older generation which is no longer made. The old generation monitor would not be compatible with the new camera since they operate on different frequencies, so you will need to…

view full answer...

Answer 10

You're absolutely right, it is kind of confusing to figure out which topper you need for your Slide-Out. In order to get the correct slide topper, your width measurement should include the width of the flange, which is the widest part of the…

view full answer...

Answer 11

Hello again Michael. I'm sorry to say the Power Gear 500456 is an obsolete part. The entire kit #LC359259 is required for replacement to make it compatible with the old system. If you order the #LC82FR on its own it won't work with your…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Wiring Instructions for 12 Volt Lasalle Bristol RV Fan # 344410TSDC36BNOKCY

Product Page this Question was Asked From

Continue Researching