Can Replacement Parts Still Be Had for Atwood Hydraulic Braking Assemblies 84210
Updated 05/14/2020 | Published 05/11/2020
Question:
Looking for a direct replacement for Atwood 84210 wheel cylinder kit. Can you point me in the right direction? I found one set, the real thing - exactly what I have, but need another pair.
asked by: Al
Expert Reply:
The Atwood Hydraulic Braking Assemblies 84210 are no longer made so replacement parts for them are not easily found. If you wanted, you could scour the internet and you might have luck finding someone with replacement parts for these in stock. That said, I would have my doubts of this since they are very old and no longer produced so the best option would be to replace the assemblies for which we have the Dexter Hydraulic Trailer Brake Kit part # 23-398-399. If you were able to find the wheel cylinders, what about the pads when they wear down or the springs when they break?
Product Page this Question was Asked From
Dexter Hydraulic Trailer Brakes - Uni-Servo - 7" - Left/Right - 2.5K
- Trailer Brakes
- Hydraulic Drum Brakes
- Standard Grade
- Manual Adjust
- Single Servo
- 7 x 1-3/4 Inch Drum
- 2500 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Hydraulic Trailer Brakes - Uni-Servo - 7" - Left/Right - 2.5K
- Shop: Dexter Hydraulic Drum Brake Assembly - Uni-Servo - 7" - Left Hand - 2,500 lbs
- Q&A: Replacement Hydraulic Brakes for Pop-Up Camper
- Video: In-Depth Review of the Dexter Hydraulic Trailer Brake Kit
- Video: The Low-Down on the Dexter Hydraulic Drum Brake Assembly
- Shop: Replacement Right-Hand Uni-Servo Wheel Cylinder Assembly for 7" Brakes - Qty. 1
- Shop: etrailer Hydraulic Trailer Brakes - Uni-Servo - 10" - Left/Right - 3.5K
- Q&A: Correct Replacement for Atwood 7" x 1-3/4" Hydraulic Drum Brakes
- Shop: Dexter Hydraulic Drum Brake Assembly - Uni-Servo - 7" - Right Hand - 2,500 lbs
- Search Results: trailer bearings races seals caps
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Shop: Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy
- Article: Happy Holidays from etrailer!
- Q&A: Parts and Recommendations for Replacing Wheel Cylinders On a Trailer with Hydraulic Drum Brakes
- Q&A: Flexible Hydraulic Hose For Replacement Right-Hand Uni-Servo Wheel Cylinder 54-80-4
- Q&A: Identifying and Replacing Hydraulic Trailer Brake Cylinder
- Video: Review of the Hydraulic Trailer Brake Kit
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Shop: Suspension Enhancement
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Shop: Brake Controller
on Trailer Brakes
Al L.
5/14/2020
Just an FYI on shoes and such, I have a complete set of shoes (4 pcs) from a long time ago, and the axles I believe are Frameco (or old school Dexter), so unless Im mistaken, the springs won't be an issue as they are likely still in production. The wheel cylinders however, are turning out to be a different breed of cat. I did manage to find one pair, so the hunt continues - for now.