How Does Air Lift Air Suspension Kit Fit 1989 Chevy P30 Commercial Van

Question

Question:

AL88203 i HAVE A 1989 p30 COMMERCIAL STEP VAN WITH OVERLOAD SPRINGS. cAN i INSTALL THIS PRODUCT IN PLACE OF THE JOUNCE BUMPERS...RATHER THAN ON THE SPRINGS. oR DO YOU HAVE ANOTHER OPTION

asked by: David M

0

Expert Reply:

I attached an install diagram for the Air Lift kit part # AL88203 that fits your 1989 P30 step van and in it you can see it does not attach to the leaf spring and instead to the axle and the jounce bumper mount.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Hey Geoff, thanks for reaching out! The Firestone Ride-Rite Air Helper Springs #F33VV install slightly offset to the axle, but it sits directly above the leaf springs and doesn't interfere with the shock absorbers. I don't have a live picture…

view full answer...

Answer 2

There are a number of differences between the Firestone Ride-Rite Air Helper Springs #F2445 and Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88299, starting with fit. While the Air Lift will fit all models of the 2018 Toyota Tundra, the…

view full answer...

Answer 3

Hey Bobby, we have the Firestone Ride Rite kit part #F33VV that is a confirmed fit for your 2024 GMC Canyon AT4. Whenever available I recommend the Firestone kits as they have the highest quality bags. Are you wanting a compressor kit too?

view full answer...

Answer 4

For the Workhorse W42 chassis we have the Timbren rear suspension kit part #TGMRP30 but we don't have any air spring solutions. The Timbren kits offer the same support without requiring you to worry about air pressure and leaks though.

view full answer...

Answer 5

Hey Greg! If you're ok with black for the color you can swap out the AC unit with the Furrion Chill HE Replacement RV Air Conditioner Unit for Furrion Setup #FR86PR. This is an old R410A unit so it will be compatible. All of our old white units…

view full answer...

Answer 6

According to TorkLift, the TorkLift PowerArmor Solar Single Locking Battery Box #TLA7720RS measures 17-3/4" long x 8-3/16" wide x 12-7/16" tall. This battery box also includes a solar panel that also provides power for stored…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

How Does Air Lift Air Suspension Kit Fit 1989 Chevy P30 Commercial Van

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching