Replacement RV Stereo for Voyager AWM900

Question

Question:

I want to replace my RV stereo the old one is Voyager AWM 900 radio CD only have so much room to install the new one. with 10.5 height 7 depth 4 includes faceplate what would you recommend

asked by: Rudy J

0

Expert Reply:

I recommend the Jensen RV Stereo # JWM60A to replace your Jensen Voyager AWM900 in your RV. This has almost identical overall dimensions (10-7/16" wide x 7" tall x 6-1/2" deep) and mounting dimensions (9" wide x 6" tall x 5-1/2" deep) so no modifications are necessary for the mounting location.

The instructions have been linked for you to check out.

expert reply by: Jameson C

0

Answer 1

Hey Joseph, I'd be glad to help you decide if the 4000i is a solid enough of an upgrade from what you've had in the past including the older 4000 from Onan. Lets go over some of the changes. The new engine is larger and a different design,…

view full answer...

Answer 2

From what I can find online for specs on the AWM930/AWM930W, I recommend the Jensen RV Stereo, #JWM60A. The Jensen appears to have very similar dimension to what you are replacing so fitment should not be an issue. The Jensen RV Stereo, #JWM60A is a…

view full answer...

Answer 3

Hey Debbie, Stereo manufacturers use different wire harnesses for every stereo for some reason so you'll want to get the wiring diagram for your AWM900S and the #JWM60A and then you can just swap wire over by function so that everything is wired…

view full answer...

Answer 4

I recommend using the Jensen RV Stereo #JWM60A to replace your Jensen Voyager AWM900. This actually has almost identical overall dimensions (10-7/16" wide x 7" tall x 6-1/2" deep) and mounting dimensions (9" wide x 6" tall x…

view full answer...

Answer 5

As the FMSMA15-SS has been discontinued, I could not confirm the size of the exhaust filter that fits it, unfortunately. However, I can confirm that the Replacement Ventilation Exhaust Filter for Furrion Over the Range RV Convection Microwave #FR54FR…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 10

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 11

This is a great choice Joe and thanks for reaching out! Weigh Safe True Tow Weight Distribution Hitch #WS49MR would be a good match for your setup. Since your Grand Design toy hauler will have a loaded tongue weight between 1,300 and 1,600 lbs, this…

view full answer...

Answer 12

Hey Doug. So long as your Husky 5th wheel hitch isn't three decades old you shouldn't have any issues attaching it to the B&W Custom Installation Kit w/ Base Rails item #BWRVK2402. Most 5th wheel hitches for the last 20 years have used…

view full answer...

Replacement RV Stereo for Voyager AWM900

Continue Researching