Video Transcript for Review of B and B Molders RV Showers and Tubs - Shower Valve with Vacuum Breaker - BM25WR

Hi everyone. Steven here with etrailer. Today we're taking a look at the B&B Molders RV shower valve with vacuum breaker. Now this features a dual lever handle design. As you can see, this is your vacuum breaker. That's where you would attach your handheld shower set sold separately.

And this gives you the option to do a quarter turns to easily turn on your hot and cold water, nice matte black finish. And on the back here you got these easy to install and use plastic spin on retainers along with these two rubber gaskets here. And then of course you have your rectangular plastic deck plate. We recommend tile and tub caulk, sold separately, to be used when you're installing this as well. And this is gonna be wall mounted.

It's your typical kind of standard two hole installation. And these holes measure four inches on center. Again, that's pretty common stuff, especially in RVs and campers. But always please make sure you measure your old one before you place your order. Be sure you're getting the right stuff that you need and you can easily measure that without turning off and unhooking the water.

In most cases, you may have to, but most of the time you can get a ruler or a tape measure underneath the connected lines and get that measurement. Well folks, I think that's gonna wrap up our quick look together at this B&B Molders RV shower valve. I'm Steven, thanks for watching.