Center Rear Camera not Working on my Furrion Vision S Wireless System

Updated 04/22/2020 | Published 04/21/2020

Products Featured in This Question

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen

(737)

$464.20

Furrion Vision S Wireless RV Backup Camera System w/ 3 Cameras - 5" Screen

(737)

$800.70

Question:

The back camera says no signal and the 2 side are working

asked by: Bob

Expert Reply:

There could be a couple of things going on here, but the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras part # FCE48TASL-05 has pretty good reception and shouldn't be any connection issues because the system has a wireless range of up to 150m / 450ft. I would first start by making sure that the camera is receiving power- the red LED light on the camera should be on to give this indication. Once the camera is powered on, you'll want to hold down the camera pairing button on the bottom of the camera for 2 seconds- check the linked photo for the location. I would also make sure that all of the electrical appliances inside the 5th wheel are turned off when you're trying to do this since electrical signals can interfere with this process.

If you're still not able to pair the system after running through these steps, let me know and I can recommend a couple of other things for you to check out that will help get you up and running.

expert reply by: Randy B