Replacement for Titan Model 6 Trailer Brake Actuator
Published 04/09/2020
Products Featured in This Question
Question:
The damper pin hole is slightly elongated and the bar on the master cylinder is bent. Is this repairable or time for a replacement? On a 7500 lb boat trailer is model 6 still a good choice?
asked by: Dave
Expert Reply:
That is a great photo, thank you; and while there are certain repair parts available for a Titan Model 6, I recommend replacing it altogether. The reason for this is the corrosion looks to have taken its toll on the actuator, and is at the point where a replacement makes the most sense in terms of safety and value.
The Titan Model 60 is still a good option, and the right one will depend on if you have disc or drum brakes:
- Disc Brakes: Titan Zinc-Plated Brake Actuator - Disc - 2-5/16" Ball - Bolt On - 8,000 lbs # T4747200
- Drum Brakes: Titan Zinc-Plated Brake Actuator - Drum - 2-5/16" Ball - Bolt On - 8,000 lbs # T4079200
There is another option you may want to consider checking out, which is from Demco. I really like these because of their eZ latch system that doesn't require any manual activation of the latch, it just snaps on. These actuators have a 4 inch drop, and like the Titans, also couple to a 2-5/16" hitch ball and have an 8,000 lb capacity:
- Disc Brakes: Demco Hydraulic Brake Actuator with Drop - Disc - Zinc - 2-5/16" Ball - 8,000 lbs # DM8758811
- Drum Brakes: Demco Hydraulic Brake Actuator w/ Drop - Drum - Zinc - 2-5/16" Ball - 8,000 lbs # DM8759411
I have added links to video reviews for you to check out as well.
Product Page this Question was Asked From
Dexter Zinc-Plated Brake Actuator - Disc - 2-5/16" Ball - Bolt On - 8,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Boat Trailer
- Construction Trailer
- Farm Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 8000 lbs GTW
- 2-5/16 Inch Ball Coupler
- 3 Inch Channel Tongue
- Disc Brakes
- No Lockout
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: An In-Depth Look at the Dexter Zinc-Plated Brake Actuator w/ Drop
- Shop: Demco Hydraulic Brake Actuator w/ Drop and Electric Lockout - Disc - Zinc - 2-5/16" Ball - 8K
- Shop: Demco Hydraulic Brake Actuator w/ Drop - Disc - Zinc - 2-5/16" Ball - 8,000 lbs
- Shop: Dexter Zinc-Plated Brake Actuator - Disc - 2-5/16" Ball - Bolt On - 8,000 lbs
- Shop: Demco Hydraulic Brake Actuator w/ Drop - Drum - Zinc - 2-5/16" Ball - 8,000 lbs
- Shop: Demco Surge Brake Actuator w Drop and Electric Lockout - Disc - Zinc - 2-5/16" Ball - 12.5K
- Shop: Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Video: Review of Demco Brake Actuator - Surge Brakes Actuator - DM8750311
- Q&A: Replacement Brake Actuator for Global Direct GDC-80 Brake Actuator
- Q&A: What Actuator is Needed for Hydraulic Disc Brakes with 1,500 psi Rating Requirement
- Q&A: DA91 Demco Disc Brake Actuator for 2-5/16 Hitch Ball with Electric Lockout Needed
- Q&A: Is the Demco Hydraulic Brake Actuator DM8758811 Model DA91
- Video: What to Know About the Demco Hydraulic Brake Actuator w/ Drop
- Video: Feature Review Dexter DX7.5 Drop-N-Go Brake Actuator
- Video: HydraStar Electric Over Hydraulic Actuator Kit Installation - 2020 Jayco Pinnacle Fifth Wheel
- Video: Mount: Mounting Bolts and Hardware for 10" Brake Assemblies on a 1917 Ford Model T
- Video: Setting up the Hydrastar Electric Over Hydraulic Actuator Kit for Disc Brakes on a Flat Bed Trailer
- Search Results: tie down actuator
- Q&A: Replacement Titan Brake Actuator for Titan 3241639
- Q&A: Replacement Master Cylinder Recommendation for Titan Model 6 Drum Actuator T4079200
- Q&A: Solution for Banging During Starts and Stops with Titan Model 6 Actuator on Trailer
- Search Results: titan model 6
- Search Results: tandem axle leaf spring kits
- Shop: Trailer Wiring
- Search Results: brake pads
- Search Results: brake actuator