Solution for Banging During Starts and Stops with Titan Model 6 Actuator on Trailer

Updated 01/20/2020 | Published 01/18/2020

Products Featured in This Question

Dexter Zinc-Plated Brake Actuator - Drum - 2-5/16" Ball - Bolt On - 8,000 lbs

(182)

$524.01

Replacement Shock for Dexter Model 6 and 10 Brake Actuators

(144)

$60.51

Question:

This is my brake Actuator I can just about see model # __4463_ I think looks like but I need get right one the problem Im having when IAM going down the road then stop the trailer goes bang and when I take off it bangs too someone told me theres a shock absorber underneath. IAM not sure of year of trailer but boat it came with 1981 searay and trailer is 25 ft and that brake Actuator has brake line in the rear

asked by: Earl

Helpful Expert Reply:

It's a bit hard to tell based on the picture but it does look like you might have an older Titan Model 6 Brake Actuator like our 8K # T4079200. If this is the case then you can use the Replacement Shock # T1242600 to resolve the issues you're having.

The banging that you described is absolutely a common symptom of a bad shock component, so this should be all that you need. I have attached a short video review below that you can check out as well.

expert reply by: Chris R