Diagram with Dimensions for Curt Weight Distribution Shank C17132
Updated 02/29/2020 | Published 02/28/2020 >
Question:
Is there a drawing of this shank which show its measurements for overall height, length, measurements between holes, measurements from hitch pin hole to first adjusting hole, etc.. similar to the drawing for C17122?
asked by: Dana R
Helpful Expert Reply:
The Curt Weight Distribution Shank # C17132 has an overall height of 14-1/2 inches and an overall length of 12-1/2 inches. The adjustment holes are spaced 1-1/4 inches on center and the distance from the hitch pin hole to the adjustment hole is 8 inches on center. The measurement from the center of the hitch pin hole to the edge of the shank is 3-1/2 inches. From the edge of the shank to the middle of the curved section, the distance is 7-1/2 inches.
I've attached a diagram with these measurements for you as well.
Product Page this Question was Asked From
Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2-1/2 Inch Hitch
- Round - 10 Inch Drop
- Trunnion - 9 Inch Drop
- Round - 13 Inch Rise
- Trunnion - 13 Inch Rise
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Curt Adjustable Weight Distribution Shank - 8"
- Q&A: How Wide is the Curt Weight Distribution Shank C17132?
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Shop: Trailer Hitch
- Shop: Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks - 12K
- Shop: B&W Rubber Cover for Empty Turnoverball Socket
- Shop: Equal-i-zer Weight Dist Shank - 18" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW
- Shop: Equal-i-zer Weight Dist Shank - 18" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Shop: Equal-i-zer Wt Distribution Shank - 12" - 13" Rise, 9" Drop - 600 to 1,400 lbs TW
- Shop: Trailer Wiring
- Search Results: firestone air bag
- Search Results: firestone air bag compressor kit
- Shop: Ladder Rack
- Shop: Brake Controller
- Search Results: akebrk~7
- Search Results: curt a20
- Search Results: tool box latch
- Q&A: Kit to Convert 7k Axles of 2024 Brinkley Z3100 to Electric Over Hydraulic Disc
- Q&A: Electric Over Hydraulic Brakes Don't Work w/Brake Pedal on Newer GM Trucks w/OEM Brake Controller
- Search Results: disc brake kit
- Shop: Vehicle Seat Covers
- Search Results: 12 inch drop hitch
- Q&A: 2-1/2" Curt Weight Distribution Hitch for 2026 Ford F-250
- Q&A: Best Weight Distribution Shank for a 2018 Ram 2500
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Availability of Longer 2-1/2" Shank for ReCurve R3 Weight Distribution Hitch
- Q&A: Looking For Budget Friendly Weigh Distribution Hitch To Pull 5K Dump Trailer
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: The 5 Best Trailer Drop Hitches You Can Buy



