Replacement for SCS/Frigette Coach Step Controller Part 202-3230

Question

Question:

We are replacing SCS Frigate 202-3230, will the LC301702 work?

asked by: Laura L

0

Expert Reply:

The correct replacement control model for the SCS/Frigette Coach Step Controller part 202-3230 is the Replacement Control Module for Lippert Electric Coach Step part # LC301702.

expert reply by: Conner L

0

Answer 1

From the picture you provided it appears you have the Lippert Kwikee 42 Series Double Tread Electric Step #LC372779. Unfortunately, we don't have replacement parts for the steps. Before purchasing make sure the mounting bolt pattern matches.…

view full answer...

Answer 2

I sent all of the pictures you sent me to the current manufacturer of the Coach steps (Lippert) and they told me that the correct module you need is the part #LC301702. Your wire colors might not totally match but the purple wire of the new module is…

view full answer...

Answer 3

The Curt A30 part #C66HR does fit the same base rails as the A25 you have now and are considering selling. So the A30 would easily replace what you have and offer more weight capacity.

view full answer...

Answer 4

I have attached for you below a list of troubleshooting steps for the Fan-Tastic Vent Roof Vents like part #FV807350 which will vary depending on what symptoms your roof vent is having and what particular model you have. The remote reprogramming…

view full answer...

Answer 5

The correct replacement for your 300-1406 motor is the Replacement Motor for Lippert Electric Coach Step part #LC301695. If you need other components I would need more info on the steps as this specific motor fits quite a few different steps. If…

view full answer...

Answer 6

I reached out to my contact at Lippert who said you have a Coach Step and your replacement motor is part #LC301702.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement for SCS/Frigette Coach Step Controller Part 202-3230

Continue Researching