bing tracking image
Last Chance for 2025 Savings!
SAVE NOW
Customer Service My Orders
Q & A Icon

Troubleshooting Lippert Ground Control Rear Jacks that Wont Retract and Light Flashing  

Updated 01/06/2020 | Published 01/05/2020

Question:

How do I get Jacks down on leveling system when earJacks are up. Rear right is flashing

0

Expert Reply:

Sounds like it could be a bad control module. For the 6 point system you have # LC675817 you'd need the # LC346005 but let's first troubleshoot to determine this.

The first thing you are going to want to do is check for blown fuses on the control board. If the fuses are good to go then you will want to make sure there is not a binding issue within the jack leg. To do this you will want to use the manual override feature on the top or bottom and make sure there is no resistance when turning (see picture). If there is resistance then the leg will need to be replaced with the Replacement Right Rear Leg for Lippert Components Ground Control part # LC344792.

If there is no resistance when using the manual override on the jack leg then we are going to want to check all of the electrical connections to the jack leg and control board. If all connections appear to be secure then switch the right rear and left rear pigtails that lead into the control board. If the problem jack works when switched at the control board then the issue is likely the control board itself and will need to be replaced with the part numbers I mentioned earlier.

If the problem jack still does not work with the pigtails switched then the issues is most like with the motor and it will need to be replaced with the Replacement Hall Effect Motor for Lippert Components Ground Control 3.0 Leveling System part # LC343758.

expert reply by:
0
Jameson C
click to enlarge
Ask The Experts a Question >>

Product Page this Question was Asked From


Featured Help Information

Instructions

Instructions for LC675817
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>