Dimensions Of Replacement Lens For Gustafson RV Scare Light

Question

Question:

what are the deminsions ?

asked by: James D

0

Expert Reply:

The Replacement Clear Lens for Gustafson RV Scare Light part # 291-000002 is a replacement lens for the Gustafson RV Scare Light - Surface Mount - Oval - Black Base- Clear Lens part # 277-000485. The lens measures 8-3/4" long by 3-7/8" wide.

expert reply by: Heather A

0

Answer 1

The Replacement Clear Lens for Gustafson RV Scare Light part #291-000002 is a replacement lens for the Gustafson RV Scare Light #277-000485. The lens measures 8-3/4" long by 3-7/8" wide.

view full answer...

Answer 2

We do carry the lens for the Gustafson 12V RV Porch Light #277-000485 you were looking at with part #291-000002. I was able to find a dimensional drawing of the lens for your current light but I do have the measurements for the lens (pictured below).…

view full answer...

Answer 3

Hey Roger, thanks for reaching out! Yes, to replace the lens on the Gustafson 12V RV Porch Light #277-000485 you need the Replacement Clear Lens #291-000002. Did your lens break?

view full answer...

Answer 4

I took a look at what we have, and the closest I was able to get to your 8-1/2" x 3-1/2" lens is the: -Replacement Clear Lens for Gustafson RV Porch Light #291-000002. This lens is clear in color like you mentioned, and measures 8-3/4"…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Dimensions Of Replacement Lens For Gustafson RV Scare Light

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching