Comparison of Draw-Tite 76271 and 36671 for a 2020 Subaru Forester

Published 12/11/2019

Products Featured in This Question

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(461)

$176.69

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(2971)

$49.54

1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs

(2621)

$11.37

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

(54)

$180.38

2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs

(1358)

$12.62

Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs

(3843)

$41.40

Question:

What's the difference between the Draw-Tite 76271 and 36671 for a 2020 Subaru Forester?

asked by: Stitch

Expert Reply:

The Draw-Tite # 76271 is a Class III hitch with a 2 inch receiver tube. This is the more popular receiver size that has a much larger selection of hitch mounted accessories available that would be compatible. The # 36671 is a Class II hitch that uses the smaller 1-1/4 inch receiver tube. Both hitches have the same towing capacity, but the Class III has a much larger tongue weight capacity at 525 lbs than the 350 lb capacity of the Class II. So, If you are wanting to carry 4 heavy bikes around or a fully loaded cargo carrier, the Class III would definitely be the way to go and is what I recommend.

If you were needing the hitch for towing purposes, you'd need a wiring harness, # 118467 a 2 inch ball mount # D-28 and # 19260 for a 1-7/8 inch trailer ball or # 63845 for a 2 inch.

I've linked you to installation instructions and videos for the hitch and the wiring harness I recommended.