You don't want to waste time on slow fills out on the job. This 12V transfer pump wires to a battery with 18' power and 5' ground leads, and moves 20 GPM. Hook up the 12' 1" hose and manual nozzle, fuel, and shut down.
When your equipment it out on the field or jobsite, fueling goes smoother when the pump and tank goes there too. This Fill-Rite fuel transfer pump runs on a 12V DC motor, so you can wire it to a 12V battery power source and fuel where you work.
The pump includes 18' of 12-gauge power wire and a 5' ground wire to help you reach your power source without piecing together extra wire on day one. The adjustable electrical junction box rotates 180 degrees, which helps when your mounting position forces the wiring to face a certain direction.
Fuel transfers can turn into longer runs than you planned. The motor is thermal protected to help prevent overheating, which helps protect the pump when you are working through a longer fueling routine.
This pump uses rotary vane technology to deliver consistent performance for your day-to-day fueling. With a 20 GPM flow rate, it is a solid match for fueling tanks in the 20-80 gallon range without turning each fill into a wait.
The standard 2" bung mount works with many fuel tanks and drums. The telescoping steel suction pipe adjusts from 20" to 34-1/2", and has holes on either side near the bottom so it doesn't seal against the floor of the drum. That helps reduce the amount of sediment pulled from the bottom of the tank. The included 12' 1" hose has a static ground wire to help reduce static buildup while you transfer fuel.
A built-in mesh strainer filters out larger particles and contaminants before they move through the pump. That small step up front can help protect your equipment and keep your fueling routine running smoother.
The cast aluminum manual nozzle gives you hands-on control at the tank. The green cover helps indicate it is set up for auto diesel fuel, and the nozzle boot attaches to the pump body so you have a place to stow it between fills.
Run it with the common fluids you're already pumping: diesel, gasoline, ethanol blends up to E15, biodiesel blends up to B20, kerosene, and mineral spirits.
The on-off switch lever includes a metal stopping arm for longer use, so you can run the pump, shut it down, and move to your next task without babying the controls.
Do you have a question about this Fuel Transfer Pump?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.