Furrion Vision S Wireless Monitor Doesnt Turn On

Published 11/26/2019

Products Featured in This Question

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen

(735)

$480.75

LCD Digital Circuit Tester

(28)

$27.09

Question:

Is there a fuse inside the monitor?

asked by: Mark V

Expert Reply:

The Monitor for your Furrion Vision S wireless Rv Backup Camera part # FOS43TASF is meant to come on as soon as it has a 12V power source. Some vehicles only power on the 12 volt accessory outlet when the vehicle is running; you want to check that fuse to see if it's blown, and if it's getting power.

You can check the fuses with part # PTW2992, and test to see if the fuse gets power with the key off, in the run position, or vehicle running.

Another item to check is the camera, you need to make sure the camera is on as well. There is a blue light that will illuminate on the camera to let you know when it has power.

expert reply by: Robert C

Mark V.

11/26/2019

Is there a fuse inside the monitor?

Robert C.

11/26/2019

I reached out to my contact at Furrion, he told me that there is a fuse inside the monitor's cord at the end of the 12v plug/cigarette outlet. If you unscrew the silver tip on the end of the plug, there is a 2 amp, 125v slow blow fuse.