Leveling System Green Screen and Beeping- Which Error Is This and How To Fix Screen?

Updated 09/23/2024 | Published 10/23/2019

Question:

The leveling control is lit up green but doesn’t respond at all, just beeps real loud about every 10 seconds

asked by: Sean F

Expert Reply:

When your Lippert Ground Control system is beeping, it means there is some sort of error and it sounds like your screen isn't actually showing what that error might be.

The first step you'll need to take is to unplug the 4 pin connection on the back of your control panel and make sure that the connections are clean and then plug it back in- this should get your screen back up and running and allow you to see what the error is.

You'll want to hit enter to acknowledge this. If you're getting a jack error when the screen comes back up, you'll want to extend the legs 6" and then retract them all back up completely-which should allow the system to reset and get your system back up and running again.

If these steps don't fix the issue, let me know and I've got a couple of other things that you can look at.

expert reply by: Erik B