How Many of the etrailer.com Trailer Hub and Drum Assembly Are Needed for a Dual Axle Trailer

Updated 04/21/2020 | Published 10/03/2019

Products Featured in This Question

Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased

(1710)

$103.78

Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles

(2618)

$7.65

Replacement Trailer Hub Bearing - L44649

(2074)

$14.16

Replacement Trailer Hub Bearing - L68149

(2074)

$14.31

Question:

Hello I have a home made dual 3500# axle car hauler. I would like to know if this part number AKHD-545-35-EZ-K includes one or two hub assemblies?

asked by: Jack

Helpful Expert Reply:

The part # AKHD-545-35-EZ-K comes with 1 trailer hub and drum assembly (along with the bearings, grease cap, and lug nuts for mounting a trailer wheel). So for your dual axle trailer you'll need to change the quantity to 4.

I have attached an installation video that you can reference but please also ensure that your current bearings match the # L68149 and # L44649 bearings, and that your grease seal has an inner diameter of 1.719" like the seal # 58846 that comes with this assembly.

expert reply by: Jon G

Dan

4/19/2020

Hello, are these self adjusting brakes? Or manual adjustment?Thanks

Chris R.

4/21/2020

The etrailer Hub # AKHD-545-35-EZ-K mentioned above is just for the hub/drum assembly - electric brakes are not included. For self-adjusting 3,500 pound assemblies the etrailer # AKEBRK-35-SA will work perfectly.