Weight Distribution System for 2019 Forest River NoBo 19.5 Plus Brake Controller
Published 08/29/2019 >
Products Featured in This Question
Question:
Hi folks, Looking for a Weight Distribution System/anti-sway hitch for a Forest River NoBo 19.5. Ill be towing with a 2019 Nissan Frontier SV FWD. The tongue weight of the NoBo is 365lbs. and the UVW is 3,456 lbs. If you could let me know what you recommend for good, better and best that would be great. Also looking for a brake controller for the trailer as well. Thanks in advance for the help,
asked by: Phil D
Expert Reply:
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
The Fastway e2 part # FA94-00-0600 would be a good solution. It has the correct tongue weight range of 200 to 600 lbs and features 2 points of friction sway control which helps prevent sway from passing vehicles/wind.
Best solution is the Strait Line kit part # RP66082 which has same tongue weight range but also has the best sway control that works to fight sway before it starts in the most efficient way.
For a 2 inch ball you would want part # A-90 and for a 2-5/16 inch ball # 19286.
So the easiest to install brake controller that also works really well is the Curt Echo Mobile part # C51180. Basically this just plugs into an active 7-way and once you sync it to your phone it's ready to go. This brake controller is proportional which means it senses the amount of deceleration your tow vehicle is applying and applies the trailer brakes in a relative way.
Product Page this Question was Asked From
Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD Only
- Round Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- Top-Mount
- Fits 2 Inch Hitch
- Requires Disconnection
- 500 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Are SnapPad StakPads Available In Different Colors
- Q&A: How Does Brake Controller Unplug from Vehicle to Prevent Battery Draw
- Q&A: Custom Mount Hitch For a 2025 Ram 2500 Diesel Model
- Q&A: Blue Ox Weight Distribution System for Trailer with 600 lb Tongue Weight
- Q&A: Recommended Weight Distribution For Trailer With 600-Lb Tongue Weight
- Article: Trailer Wiring Diagrams
- Q&A: Curt Weight Distribution System Recommendation for 2005 Chevy Colorado Towing Enclosed Trailer
- Q&A: Can I Use a Weight Distribution Hitch on a 2019 Honda Pilot
- Article: How to Measure for Trailer Hitch Drop
- Article: Best Air Bag Suspension 2025
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)



