Can I Use 7-Way Female Plug On My Trailer With 7-Way To 7-Way Male Adapter
Updated 08/19/2019 | Published 08/16/2019 >
Products Featured in This Question
Question:
I was wondering if there are any issues that I would run into if I swapped the male 7 way plug on the trailer side to a female end so that I could have a removable double male wire between the car and trailer. I just want to clean up the look of the trailer. I know I would probably have to rewire the female end on the trailer so it mirrored the car side, but would there be any other issues that I would run into? Anything that would be dumb or dangerous about having a removable wire? Thanks in advance.
asked by: Jimmy V
Expert Reply:
It is possible to use a a female 7-way plug on the trailer if you wanted to using part # 30717 and then using an adapter Bargman 7-Way Molded Trailer Wire Connector - Double-Ended part # 50-67-210 to connect the two plugs. As long as you wire the female plug to match the wiring functions of your vehicle side you won't have any issues. However the adapter would need to stay with the trailer if you ever wanted to tow it with another vehicle because most trailers have a male end connector and vehicle's have the female end.
Another option is to use the TorkLift Wiring Harness Extension for 24" SuperTruss Hitch Extender - 7-Way RV part # TLW6024 and plug the existing male plug into the female plug on the extension. The other male end would plug into your vehicle's 7-way. I think the first way would look cleaner though.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: 12 Gauge 2 Conductor Jacketed (Brake) Wire Per Foot
- Search Results: trailer wiring
- Shop: Brake Controller
- Q&A: Converting From 7-Way Round to 7-Way Flat Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Vehicle Tow Bar Wiring
- Search Results: trailer brake controller
- Search Results: 7 pole extension
- Search Results: wiring
- Search Results: brake controller
- Shop: Tuson DirecLink Base Model Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Curt Jacketed 2-Wire Brake Wire - 12 Gauge - 180'
- Search Results: 7 way to 7 way extension
- Search Results: 7 round
- Shop: Demco Trailer Connector Adapter - 6-Way - 7' Cord
- Shop: Duplex Outlet Cover - Polar White
- Shop: Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector for Aluminum Beds - 10' Long
- Video: Curt T-Connector Vehicle Wiring Harness Complete Installation - 2021 Mazda CX-9
- Q&A: Can I Upgrade Trailer Axle From 3,500 lb to 7,000 lb Axle and Keep 14 Wheels
- Q&A: Parts Needed to Convert a 58 Shasta Trailer W/ A Two-Wire Setup to a 3-Wire System
- Q&A: Different Types of Light Bulbs Used in Trailer Lights
- Q&A: Does Ground Wire of 4-Way to 7-Way Adapter Need to be Grounded
- Shop: Suspension Enhancement
- Video: Review of TowSmart Custom Fit Vehicle Wiring - Wiring Adapters - TS56QR
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
