Replacement Lift Motor for Fan-Tastic Vent # FV803350

Question

Question:

Is the a proper replacement for the cover motor in this vent? The one I have removed is 8 RPM and I see that this one is 17rpm. Thank you.

asked by: Alan M

0

Expert Reply:

I reached out to my contact at Fan-Tastic Vent and she said the correct replacement motor for your 12V Vent Fan # FV803350 if it was manufactured after 2014 is the 17-rpm # FVK6010-81. This does operate at a higher speed than what originally came on your assembly but will work well.

If you happen to have an older unit manufactured before 2014 that has a lower 7-rpm rating, we no longer have that part available.

expert reply by: Chris R

0

Answer 1

First thing you will want to check is that the fan has power and is grounding properly. You can try using jumper wires to the vent wiring that are run to known ground and power to see if that works. Next, you can check the fuse of the fan to make…

view full answer...

Answer 2

Thank you for providing the pictures. The Fan-Tastic Vent Replacement Lift Arm for Roof Vents with Flat Lids item #FVK8014-05 replaces the flat roof vent arm on Fan-Tastic Vents. If you have a Domed shape Fan-Tastic vent you will need the Replacement…

view full answer...

Answer 3

According to my contact at Fantastic Vent the correct replacement lift motor to use in your vent is part #FVK6010-81, not item FVK-6050-80. The replacement motor does operate at a higher 17-RPM speed. Since your fan is of a lower rpm and manufactured…

view full answer...

Answer 4

The correct lift arm replacement for your Fan-Tastic 6504-414 is the part #FVK8011-05.

view full answer...

Answer 5

Hey Randy, It is definitely possible that with the replacement of the lift motor to part #FVK6010-80 that it wasn't tightened up exactly the same as the previous motor, causing the gears to not engage. You'd have to take a look at the…

view full answer...

Answer 6

Hi Rick, The Replacement Lift Motor #FVK6010-81 still works in Fan-Tastic vents that were made before 2014 like yours, but you'll need to cross the wires. If yours go red to red/black to black you'd just switch that up.

view full answer...

Answer 7

For the Fan-Tastic Vent Fan model 6300 there could be two reasons why it's not opening for you: The manual crank motor could be broken, which the correct replacement is the Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents…

view full answer...

Answer 8

I attached a picture of the style of lift arm that the part #FVK8011-05 is designed to replace. Check it out and compare it to what you have to know if it is the correct replacement product.

view full answer...

Answer 9

If the motor you have on your Fan-Tastic roof vent is a low-speed (7 rpm), then the replacement motor is no longer available. This is fairly unlikely though. Most likely you need the 17 RPM part #FVK6010-81 as this is much more common. You should see…

view full answer...

Answer 10

Hey John, If you're testing the wiring and there's power getting to the lift motor when the switch is in the off position then you either have a wiring issue or the vent is getting power from somewhere else. With the light going out…

view full answer...

Answer 11

We don't have a housing separately in white, there is a way to get it, though it comes with the housing along with a new motor: - Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts - White #FVK6010-81 So this…

view full answer...

Answer 12

The correct replacement arm for your Fan-Tastic Vent roof vent is the Replacement Lift Arm for Fan-Tastic Vent Roof Vents #FVK8011-05. The replacement arm is the same for the power lift and the manual vent.

view full answer...

Replacement Lift Motor for Fan-Tastic Vent # FV803350

Product Page this Question was Asked From

Continue Researching