Troubleshooting Furrion Monitor Not Turning On

Updated 07/22/2019 | Published 07/19/2019

Products Featured in This Question

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen

(718)

$450.25

12 Volt Outlet Kit, 20 amps

(331)

$40.45

Question:

I have a 2fos48tapk-bl Back Up Camera. Camera seems to be okay as the blue light comes on. Monitor will not turn on. Trying to find a fuse TAL125V for the power cord with no luck on-line.

asked by: Keith B

Expert Reply:

Since the discontinued Furrion Digital Wireless Observation System FOS48TAPK-BL (similar to part # FOS43TASF) plugs into a 12V accessory outlet like what comes with the kit # RM-9332 you just need to make sure your 12V accessory outlet has power when using the system. If it isn't receiving power then there could be a broken fuse somewhere or there could be some wiring that is messed up on your vehicle/RV. You can also plug in a different accessory to make sure that it isn't the monitor or the wiring for the monitor power.

You should be able to reference your owner's manual for a list of fuses to help you narrow down where to look. If all else fails you can always install the outlet kit I mentioned above to power your monitor.

expert reply by: Jon G