Lead Leg Replacement or Repair for 2008 Crossroads Cruiser 29CK 5th Wheel Landing Gear

Updated 06/05/2019 | Published 06/03/2019

Products Featured in This Question

Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs

(207)

$755.17

Replacement Lead Leg for Venture 5th Wheel RV Landing Gear

(64)

$392.59

Lead Jack Repair Kit for Stromberg Carlson Landing Gear

(53)

$50.82

Replacement Lead Leg for Stromberg Carlson Landing Gear - 33-1/2"

(48)

$258.36

Question:

The landing Jack on the gearbox side of my Crossroads Cruiser is slipping and will move freely when I pry on it. -The far side is working fine, and is, in fact, jacking the entire trailer front. I have placed a hitch stand on the hitch to reduce the burden on the working leg. -I have not been able to determine what part is failing. -Do you have disassembly instructions for the failing leg? -Can I buy a repair kit for the leg, and/or a replacement leg? -I do not see a model # and/or part # -The drive motor is labeled a Venture Thank you

asked by: James D

Expert Reply:

It is very likely that you have the Venture landing gear with your Venture labeled motor. The gearbox is obviously working because the follow leg is working, so I recommend repairing the lead leg with # LG-146059 or replacing the lead leg with # LC119102. You can double check the fit by measuring the outer tube with press fitted cap which will be 29-1/2 inches.

If you get a different measurement of 33-1/2 inches then you will use the replacement leg # LG-177202.

expert reply by: Jason S