Picking Out Brake Assemblies for 2005 Cedar Creek 36RLS

Updated 05/09/2019 | Published 05/08/2019

Products Featured in This Question

Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs

(364)

$90.36

Demco Hydraulic Drum Brake Assembly - Free Backing - Galvanized - 10" - Left Hand - 3,500 lbs

(182)

$96.73

Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Left Hand - 8,000 lbs

(47)

$126.91

Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Right Hand - 8,000 lbs

(43)

$165.40

Question:

Good Evening I cant find the breaks for my 2005 Cedar Creek RV 5th Wheel. I have 8 lug Tire Size235x85Rx16 2-axles 14,350 lbs Thank You for assisting me.

asked by: Bill S

Expert Reply:

I can help you find the right assemblies, but I do not know exactly which ones you have on your trailer.

To pick out the correct brake assemblies for your trailer you need to know a few things.

You will want to measure the inner diameter of your hub/drums and the depth of the drums to determine what brake assembly dimensions you need. For example the part # 40716 is a 10 inch by 2-1/4 inch thick brake assembly.

You also want to determine what the bolt pattern is of your assembly mounting flange. The standard size is 4 on 4 inch. You also want to determine the axle capacity of your trailer and go with an assembly that has the same rating, the # 40716 has a 3,500 lb capacity. Most likely you have higher axle capacities due to the weight of your trailer like the # AKEBRK-8R and # AKEBRK-8L which are for an 8k capacity.