Replacement Ratcheting Handle for Dutton-Lainson Boat Trailer Winch

Question

Question:

I believe it’s a DL brand number on my handle is 204457A do you have a ratcheting handle to replace mine

asked by: Frank E

0

Expert Reply:

I do have some great options for you but the number you referenced on the warning label, 204457A is simply the part number for the warning label and it doesn't really tell us much about the winch unfortunately. However, the model number which can give us the info we need is stamped into the metal on the side winch opposite of the handle.

If you have a DL-Series then you will need the Ratcheting Handle part # DL70371. If you have a B-Series then you will need the Ratcheting Handle part # DL70346 or if you have a DLB-Series then you will need the Ratcheting Handle part # DL70347.

expert reply by: Conner L

0

Answer 1

I reached out to my contact at Dutton-Lainson and she said that there is not a ratcheting handle available that's compatible with the DL1402A model Hand Winch #DL15303. For one that can be used with a ratcheting handle a higher-rated winch is…

view full answer...

Answer 2

The B Series Brake Winch Ratcheting Replacement Handle by Dutton-Lainson part #DL70346 is designed to replace the regular non-ratcheting handle on all single speed Dutton-Lainson B Series brake winches. Therefore, this handle is compatible with a…

view full answer...

Answer 3

Many winch handles, especially ratcheting handles, fit specific winches. Handle #DL70347 fits Dutton-Lainson DLB-series brake winches. If you do not have a winch in this series the handle will not fit. The handle threads onto a 1/2 inch coarse…

view full answer...

Answer 4

It might be possible to repair the winch you have currently but without knowing what winch you have it's really pretty hard for me to say if that's possible or not. Most likely it's time for an all new winch like the Dutton Lainson part…

view full answer...

Answer 5

The problem that you are going to run into is the weight of your boat and trailer. The Reese Hitch Box Extension, #RP45292, has a maximum weight capacity of 8,000 lbs, but that is only if you are using a weight distribution system which isn't…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…

view full answer...

Replacement Ratcheting Handle for Dutton-Lainson Boat Trailer Winch

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching