Will Trailer Wheel Center Cap with 3.19 Hub Bore Measurement Fit Hub Bore with 3-1/8 Measurement

Updated 04/29/2019 | Published 04/26/2019

Products Featured in This Question

Trailer Wheel Center Cap, Chrome, 3.19" Pilot Size

(813)

$20.64

4" Carbon Fiber Digital Caliper

(26)

$12.13

Question:

I measured my bore hole as close as I could and it seems to be 3 1/8 inch or 3.125. The nearest I can find is your 3.19 bore hole center cap. I have searched the internet with no luck. I f I buy these and they are tight is there anything wrong with grinding my bore hole out .065 to make these fit? Also, What is your return policy. Thank you

asked by: Steve V

Helpful Expert Reply:

The Trailer Wheel Center Cap # 319EZ may be a little too big if you measured right at 3-1/8" for your hub bore. Since this is a fairly precise measurement I recommend taking it again and possibly use a digital caliper like part # PTW80157 if you have one handy to make sure it fits.

I do not advise grinding the hub bore out at all as that could compromise the integrity of your hub.

expert reply by: Jon G