Troubleshooting Red Light Staying on With Even Brake Braking System  

The Replacement Quick Exhaust Valve for Roadmaster BrakeMaster or Even Brake Supplemental Braking System #RM-450601-50 can be installed in your Roadmaster Even Brake Portable Supplemental Braking System - Proportional #RM-9400 by first removing the…

I have included a couple of links to videos that show example installations of the Even Brake #RM-9400 which has that ICX transmitter. Use these videos as a guide to help with the installation on your 2012 Wrangler Unlimited.

The brake switch wire you need should be the white/brown wire on your 2016 Jeep Wrangler Unlimited. Use a circuit tester such as #PTW2993 or a meter if you have one to verify the function of that wire. The brake switch on your Jeep is indeed in a…

I spoke with my contact at Roadmaster regarding the Even Brake Supplemental Braking System #RM-9400. He stated that the Transmitter #RM-9420 is indeed required for proper operation of the system. The transmitter not only sends signals to the monitor…

The cold side of a brake pedal switch only has power running to it when the brake pedal is pressed. This tells the system when the toad vehicle brakes are being applied. Data is sent by the ICX to the hand held part of the system that stays in the…

The ICX Braking Monitor #RM-9430 will tie into the brake pedal switch if your brake lights come on your 2004 Honda CR-V when it is in tow mode and the brake pedal is pressed. If your brake lights do not come on when the brake pedal is pressed you…

The general reason a battery needs to be disconnected for flat towing is because there are certain functions that need to be disabled to prevent your vehicle's battery from draining. You wouldn't want to get to your destination and unhook and…

Flat towing a vehicle requires specific equipment to tow the vehicle safely and in accordance with local, state, and federal laws. A front mount hitch is not suitable for use to flat tow a vehicle behind an RV but I can tell you all of the parts that…

I checked with my tech contact over at Roadmaster and he mentioned that there could be a couple of things going on here that I'll try to address for you. First, you can access the internal components in the Even Brake #RM-9400 system by removing…

If the LCD display on your #RM-9410 monitor does not report braking activity or system status, and the LCD display reads 'Even Brake', the monitor is not programmed to the ICX transmitter. The transmitter and the motorhome monitor are…

It sounds to me like you might have an issue with the connection of the ICX transmitter and the brake signal from the towed vehicle. You're getting the power to the ICX transmitter to activate the Even Brake #RM-9400 but not the signal from the…

This error has come up in the past and Roadmster has said that since your brakes were operational and now are not, then you will need to re-wire the brake light relay that was included with the Even Brake for it to work correctly when the fuses are…