Mounting Location for Breakaway Switch on Roadmaster Base Plates for 2018 Jeep JL Wrangler

Question

Question:

2018 Wrangler JL Where do you mount the breakaway mount/switch I dont see a place to put it Thanks

asked by: Eugene D

0

Expert Reply:

The Roadmaster Base Plate Kit # RM-521453-4 referenced in your question does not feature a mounting space for a breakaway switch. This is really the case for any of the base plate kits we have available as it's really best to attach the breakaway switch and bracket directly to the vehicle and not an external attachment like the base plates or tow bar. On your 2018 Jeep JL Wrangler your best option may be to attach it to the underside of the front fascia/bumper.

expert reply by: Chris R

0

Answer 1

The Roadmaster Even Brake Supplemental Braking System #RM-9400 features an inertia sensor that activates the towed vehicle's brakes based on deceleration. When you hit the brakes in your RV or otherwise slow down, the system automatically applies…

view full answer...

Answer 2

It's pretty common for vehicle batteries to die when the vehicle is being flat towed since the braking system typically draws it's power from the towed vehicle to activate. This is a problem for nearly all systems including the Brake Buddy…

view full answer...

Answer 3

Hey Darrell, thanks for reaching out! The Roadmaster Battery Disconnect #RM-766 is only designed to be installed on the positive terminal (since the activation button pulls power from the positive terminal), so I recommend using the Roadmaster…

view full answer...

Answer 4

The original Falcon tow bar, the Falcon 5250, has been discontinued for a few years now and was replaced by the Falcon 2, #RM-520 with upgraded components. Otherwise it functions basically the same was as the original Falcon. Both are RV mount tow…

view full answer...

Answer 5

I do have an option for you but I spoke with my contact at Roadmaster and they informed me that the Roadmaster Stowaway Storage System part #RM-4000-40 which is used to attach the Roadmaster Guardian Rock Guard part #RM-4000 on the back on an RV will…

view full answer...

Answer 6

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 7

Hey Ray, The etrailer baseplates #e98965 do not work directly with that Roadmaster Nighthawk. However, there is an adapter we have available for them to work seamlessly. You will want to pair that baseplate with the Roadmaster adapter #e98984. That…

view full answer...

Answer 8

Hey Christian, welcome to the world of RV-ing! So in addition to the Roadmaster Nighthawk #RM-676 you're also goin to need: - A baseplate kit, like the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These attach to the Jeep itself so you…

view full answer...

Answer 9

etrailer is from the US. We are right in the middle near St Louis MO in a town called Wentzville. But we sell products that are made all over. Some from US and some from other countries as well.

view full answer...

Mounting Location for Breakaway Switch on Roadmaster Base Plates for 2018 Jeep JL Wrangler

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching