Mounting Plate Options for the Bulldog Winch Standard Series Off-Road Winch # BDW10043

Question

Question:

I have a bdw10043 what mounting plate can I use?

asked by: Richard

0

Expert Reply:

You can either use the Universal Mounting Plate # BDW20291 (which requires the hardware kit # BDW20297) or the Hitch Mounting Plate # BDW20011 for your Bulldog Winch Standard Series Off-Road Winch # BDW10043. Both have compatible mounting hole dimensions (10" x 4-1/2") so it just depends on where and how you plan on using the winch.

expert reply by: Jon G

0

Answer 1

I recommend using the Bulldog Winch Universal Mounting Plate for Truck and Trailer Winches #BDW20291 for your Badland Winch, which has a 4-Bolt mounting pattern (center on center) of 10" x 4-1/2". For hardware you will want to use the…

view full answer...

Answer 2

I do not have the exact replacement parts but I do have some options that might work. We have several swivel plate kits like the Swivel Plate Kit For Trailer Jacks, Item #DL22444. This plate works with a 3/8 inch swivel pin, jacks with up to…

view full answer...

Answer 3

For this application, I reached out to my contact at Bulldog Winch and we came up with what we believe is what you will need based on the information you gave me. There are many factors involved here, so we are trying to cover all the bases for you…

view full answer...

Answer 4

I do have an option for you but the Bulldog Winch Universal Mounting Plate for Truck and Trailer Winches part #BDW20291 is designed more for open flat deck trailers, it may work for you but will probably require some drilling. The Bulldog Winch…

view full answer...

Answer 5

The Bulldog Winch Universal Mounting Plate for Truck and Trailer Winches part #BDW20291 can be mounted to a flat-bed trailer using the Bulldog Winch Hardware for Universal Mounting Plate for Truck Winches part #BDW20297. The winch plate will first be…

view full answer...

Answer 6

Thanks for the photo and we do have an option to replace your jack with the 2-1/2 inch diameter mounting bracket, though the Pro Series jack you asked about will not work with that size. Instead, there is a Bulldog jack that has the necessary size,…

view full answer...

Answer 7

Yes the Smittybilt winch you mentioned would fit on the Bulldog Universal Mounting Plate for Trailer Winches part #BDW20291 that you referenced.

view full answer...

Answer 8

Yes, your Warn 17081 will fit the Bulldog Winch Universal Mounting Plate for Truck and Trailer Winches #BDW20291. It has the standard 10" x 4-1/2" mounting pattern Warn uses and the same 10" fairlead spacing as your 17081.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Mounting Plate Options for the Bulldog Winch Standard Series Off-Road Winch # BDW10043

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching